paige Posted December 11, 2012 Report Share Posted December 11, 2012 Yesterday I fired my Paragon snf243 - attempting cone 05, no watcher - and I set the knobs incorrectly. They should have been 5 - 1- 2, for 5 -6 hours, but I did 1 - 1- 2 for 7 hours. I don't know why my brain wasn't working, but that's another problem entirely. The kiln sitter never tripped and the little cone doesn't appear to have bent. Should I refire or assume that it still got pretty hot enough? What does that first (top) knob determine? Thanks for the help! Link to comment Share on other sites More sharing options...
Marcia Selsor Posted December 11, 2012 Report Share Posted December 11, 2012 I am not familiar with what 5-1-2 or 1-1-5 is. But if you didn't hit temperature, just refire using the right settings. If it doesn't work a second time, maybe you need new elements. Marcia Link to comment Share on other sites More sharing options...
paige Posted December 11, 2012 Author Report Share Posted December 11, 2012 Well that first knob is the power level, so at min setting, I doubt it got very hot. I just restarted it. Oi. I am not familiar with what 5-1-2 or 1-1-5 is. But if you didn't hit temperature, just refire using the right settings. If it doesn't work a second time, maybe you need new elements. Marcia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.