deaf258 Posted October 10, 2012 Report Share Posted October 10, 2012 I am trying to find a recipe for cone 10 Porcelain slip so I can dip fiber art in them for firing. I came across one from a classmate but she made one so long ago. I had a hard time understanding her explaining the recipe. I copied her recipe and now asking you guys if anyone with experience would tell me if this recipe is correct or not. I wrote down exactly what I saw on her paper but I don't understand some parts of it. I am very new at mixing glazes and slips. Forgive me for any spelling errors. Corrections are appreciated! Mix first: Barium Carbonate 1/2 oz Soda Ash 1 oz Water 5 gallons Sodium Silicate 2.5 fl oz Dilute 50/50 with water Then: 25% Super Standard 25% Grolleg 2% OM4 Ball Clay 28% Minspar or G200 20% Silica ___________________ 100% Additives: Gumplast 1 pint Darvan 1 tsp - small like eye dropper Makes 100 lbs slip I hope you understand I do not want to ruin the kiln or accidentally destroy other people's work in the kiln should this slip fail and make a mess. :/ Thanks in advance for your feedback! @deaf258 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.