Jump to content
Sign in to follow this  
Isculpt

Firing After Bisque Stage

Recommended Posts

My computer lost all the helpful emails that potter friends have sent me, so I'm going to ask a question that is so rudimentary that it's embarrassing. After I bisque fire to 06, what kind of time frame do I need for the next firing? Typically it is a copper carbonate firing that is followed by an underglaze firing. I don't intend to fire higher than 04 at any time. I think that I remember that there is no need for pre-firing, and that I fire 2 hours on low, 2 hours on medium, and then however long it takes to get to cone 06, or if it's the last firing, 04. Does that sound right?

I've just put my sculptures in the kiln, not realizing that I'd forgotten a few important details like HOW LONG to fire them ohmy.gif , so if anybody wants to jump in here with advice, I'm listening!

 

Thanks, Jayne

 

 

Share this post


Link to post
Share on other sites

It sounds like your second firing it just to set the color so a quick firing such as you describe should be fine.

Same for setting underglaze colors ... No need to dawdle.

 

Critical firings are for bisque which should be longer so all the impurities burn out ... slower at the start to be sure everything is dry.

Glaze firings are also time sensitive so they tend to be done on a customized basis.

Share this post


Link to post
Share on other sites

It sounds like your second firing it just to set the color so a quick firing such as you describe should be fine.

Same for setting underglaze colors ... No need to dawdle.

 

Critical firings are for bisque which should be longer so all the impurities burn out ... slower at the start to be sure everything is dry.

Glaze firings are also time sensitive so they tend to be done on a customized basis.

 

 

 

Thanks, Chris, for the reassurance!! Jayne

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.