Jump to content
Sign in to follow this  
clay lover

Which Wheel For This Person?

Recommended Posts

One of my newer hand building students wants to buy a wheel.  She has had just enough instruction to sort of center a 2 lb ball of clay and while a bit hesitant, is very focused, a good learned , OCD enough to want to get it right and does several other things with a good bit of skill.   She says she likes the wheel better than HB.  She has a studio near her to work in and room for a wheel and others who, while not wheel throwers, can run a kiln and have glazes. 

What wheel should I suggest she buy?  I have a TS Revolution, a Brent B and 2 really light weight others on loan to me, a Shimpo Whisper lite and a Pacifica 400.  I can tell a tremendous difference between the TS and the 2 light weight ones.  She has been using the Pacifica. I am going to but her on the TS tomorrow and see if she knows the difference.

Any recommendations?  Price is not a big issue. The cheapest wheel is $775, the most . the TS, is $1,200.

 

Share this post


Link to post
Share on other sites

I would say, if price isn't an issue, go all out with the top of the line TS, Brent or even a Soldner.

 

But it all depends on what the person is intending to do with it. How big do they want to throw? Unless they plan on centering a couple hundred pounds of clay at a time, there isn't really a need to spend more on a larger motor model. How big of a splash pan do they want, if they want one at all. I would suggest having one, as newer potters tend to use more water. Is noise an issue? if so, the Shimpo Whisper apparently live up to their name, with less torque being a trade off.

 

I've never heard anyone say a bad word about TS or Brent. So maybe suggest a midrange model, and spend the money, that they would have spent on going all out, and get some bats, throwing tools, etc.

Share this post


Link to post
Share on other sites

I would say, if price isn't an issue, go all out with the top of the line TS, Brent or even a Soldner.

 

But it all depends on what the person is intending to do with it. How big do they want to throw? Unless they plan on centering a couple hundred pounds of clay at a time, there isn't really a need to spend more on a larger motor model. How big of a splash pan do they want, if they want one at all. I would suggest having one, as newer potters tend to use more water. Is noise an issue? if so, the Shimpo Whisper apparently live up to their name, with less torque being a trade off.

 

I've never heard anyone say a bad word about TS or Brent. So maybe suggest a midrange model, and spend the money, that they would have spent on going all out, and get some bats, throwing tools, etc.

 

The newer Soldners don't feel right. If you can get a used one, it's a much better investment.

Share this post


Link to post
Share on other sites

Thanks, Neil.  That is what I'm heading her to.  Will she see much difference between my 1/2 HP TS and the 1/3 ?  other features seem to be the same.

 

She won't see any difference. I throw on a 1/2 most of the time, but when I use a 1/3 there's no difference. I recommend the built in splash pan. It's heavier and you can use the sides to brace against.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.