rlovett Posted December 20, 2013 Report Share Posted December 20, 2013 This may seem like a silly question, but I'm fairly new to this. I was working on a coffee mug and messed up the lines between the inside of the cup and the outside at the rim. The inside was already painted in clear glaze. To fix the conundrum, I started working the colored glaze (food safe of course) down the inside of the cup to clean up the lines. I made such a mess of it, I considered just painting over all the clear glaze on the inside with the crystal glaze. Does anyone know what that will do when fired? Thanks for your input! Rob Link to comment Share on other sites More sharing options...
neilestrick Posted December 20, 2013 Report Share Posted December 20, 2013 No idea. You'll have to test it. But it will probably run a bit, and you'll get some color shift as well. Link to comment Share on other sites More sharing options...
rlovett Posted December 20, 2013 Author Report Share Posted December 20, 2013 No idea. You'll have to test it. But it will probably run a bit, and you'll get some color shift as well. Thank you so much Neil. You said what I was suspecting. I'll go ahead and paint it and see what happens. Thanks again! Link to comment Share on other sites More sharing options...
jrgpots Posted December 20, 2013 Report Share Posted December 20, 2013 You can also use a damp cloth to remove the glaze around the rim then try again. That being said, layering of glazes is one of the best effects of glazing. Jed Link to comment Share on other sites More sharing options...
rlovett Posted December 20, 2013 Author Report Share Posted December 20, 2013 You can also use a damp cloth to remove the glaze around the rim then try again. That being said, layering of glazes is one of the best effects of glazing. Jed Thanks for the encouragement...this may be a serendipitous event afterall! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.