Jump to content
Sign in to follow this  
Isculpt

Materials to press into clay for random texture

Recommended Posts

So, should I worry or not?

 

No. Saggers in elect kilns do almost nothing to prevent the heavy carbon smoke from getting on the elements, so sagger firing would be more damaging to the elements than any material added to clay because, most likely, you're burning a lot more material in a sagger or saggers than the stuff you stick into clay. But, with that said, I don't think even firing two or three saggers with a couple of pounds of sawdust or coffee grounds in them is very harmful to the elements. I've been doing it for years.

 

Jim

Share this post


Link to post
Share on other sites

Jim,

I didn't mean fire a saggar firing in the electric kiln, I meant put the clay with ingredients into a saggar if she was worried about the burnoff. Sealed saggars even aluminum saggars DO contain carbon and protect the elements according to my friend Russel who has been doing it for 20 years and not changed his elements yet.However I wouldn't put ferric chloride in an electric kiln no matter what king of saggar it was in.

Marcia

Share this post


Link to post
Share on other sites

Jim,

I didn't mean fire a saggar firing in the electric kiln, I meant put the clay with ingredients into a saggar if she was worried about the burnoff. Sealed saggars even aluminum saggars DO contain carbon and protect the elements according to my friend Russel who has been doing it for 20 years and not changed his elements yet.However I wouldn't put ferric chloride in an electric kiln no matter what king of saggar it was in.

Marcia

 

I guess I missed your post and was just replying to Claypple. What you say above is interesting and, obviously, Russel should know what he's talking about, but I just can't imagine anything holding in all the gasses from organics without leaking or exploding. All that stuff as to go somewhere. I blew up a thick-walled sagger filled with dry coffee grounds and sawdust once when I made a tight-fitting lid to a sagger and sealed it with clay.

 

I don't think using a sagger for something with organics in it is worth the effort, even if you can make one that holds all the carbon in--which I still doubt. You probably get a lot more off-gassing from firing a bisque load of a clay like Lizella (lots of organics in it) than a clean clay with walnut shells stuck in it. And, as I said several times before, I've fired saggers that billow smoke (my kilns are outside) for years and they're still going strong. (Oh crap! I'll probably go check the kiln I'm firing today and find that two elements just burned out!)

 

Jim

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.