not a bot Posted July 8, 2022 Report Share Posted July 8, 2022 Hi, I have been online shopping for some CoreLite shelves, which I think are produced by Resco's Cedar Heights Clay division, and have noticed a few vendors that offer some similarly shaped shelves that seem to be described generically as "Hollow Core". I am wondering if there is any significant difference between the CoreLite brand name and generic products, and I am wondering if there is a specific way to identify a brand name CoreLite product when you are viewing it firsthand. Thank you. Link to comment Share on other sites More sharing options...
not a bot Posted July 9, 2022 Author Report Share Posted July 9, 2022 FWIW, here is an example of the "Hollow Core" shelves I am wondering about: https://www.theceramicshop.com/store/category/33/120/Kiln-Shelves/Hollow%2BCore/ Thank you. Link to comment Share on other sites More sharing options...
Min Posted July 9, 2022 Report Share Posted July 9, 2022 It looks like the "hollow core" ones are made from corderite (alumina + silica + trace minerals) and the CoreLite are corderite + mullite. I noticed for the supplier you linked to that the CoreLites are on sale for 35% off which makes them less expensive than the regularly priced "hollow core" ones. I don't know how long the "hollow core" ones have been out for and what the reviews for them are, CoreLites have been available for a while now, @neilestrick, still like yours? Link to comment Share on other sites More sharing options...
not a bot Posted July 9, 2022 Author Report Share Posted July 9, 2022 Thanks for taking a look. I went ahead an purchased some CoreLite shelves this morning from a small shop with a sort of informal online shopping web page. It was conveniently located near a family members home, who picked them up and will bring them down to me in a few weeks. It seemed a bit awkward buying them sight unseen from a small shop and then having a long interim before I can take a look at them, so I was trying to minimize any misunderstanding by learning what to ask about or look for. I am going to assume the shelves I bought are the real deal CoreLites that I anticipated them to be, and try not to over think it any further. Thanks very much. Link to comment Share on other sites More sharing options...
Bam2015 Posted July 9, 2022 Report Share Posted July 9, 2022 Please let us know what you think of these shelves once you have tried them out a couple of times. I'm wondering if the composition affects the pots or firing process in any way. Betty Link to comment Share on other sites More sharing options...
Mark C. Posted July 9, 2022 Report Share Posted July 9, 2022 My guess is they are all made by same manufacture. I have near experience with theses as they are not in my firing range. I have seen them fail at cone 10 only because the stilts where not over a solid core section and the shelve looked crushed (looked squashed). I suggest at cone if that is tour temp? make sure the stilts (all three) of them are supported with a core inside section My old ceramic instructor always said pay your money and take your chances-let us know how they are Link to comment Share on other sites More sharing options...
not a bot Posted July 9, 2022 Author Report Share Posted July 9, 2022 The CoreLite datasheet indicates a "Maximum Service Temperature: 2336°F" https://www.rescoproducts.com/docs/default-source/data-sheets-us/pds/corelite.pdf?sfvrsn=40fb3687_2 I would imagine that Cone 10 firing would be near the limit. We'll take special care to stack the posts. Thank you. Link to comment Share on other sites More sharing options...
Mark C. Posted July 9, 2022 Report Share Posted July 9, 2022 Its also the weight of the load along with temp The ones that failed where in a 5 foot high stack in gas kiln near the floor-so they had the whole weight of all the load on them. Link to comment Share on other sites More sharing options...
neilestrick Posted July 10, 2022 Report Share Posted July 10, 2022 On 7/9/2022 at 12:24 PM, Min said: @neilestrick, still like yours? Yes! I've never had an issue with my CoreLite shelves. I've put over 700 firings on some of them and never had to flip them. Even my big 14x28 shelves stayed flat for hundreds of firings. I cut those down to 25" half rounds last year and they're still going strong. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.