graybeard Posted December 15, 2020 Report Share Posted December 15, 2020 Hi guys, my question is about loading my kiln. If I load the kiln only 1/3 full will it make it harder to reach ^5 than if the the kiln is full? Thanks Graybeard Link to comment Share on other sites More sharing options...
liambesaw Posted December 15, 2020 Report Share Posted December 15, 2020 No it'll make it easier! But only if that wares is spread out over the kiln evenly. Otherwise you may only hit cone 5 in the empty spaces. Link to comment Share on other sites More sharing options...
neilestrick Posted December 16, 2020 Report Share Posted December 16, 2020 Spread it out evenly and you won't have any problems. If you pile it all at the bottom of the kiln you'll have unevenness issues. Link to comment Share on other sites More sharing options...
graybeard Posted December 16, 2020 Author Report Share Posted December 16, 2020 Thank you gentlemen Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.