Jump to content

Manual Gas Kiln Data Capture


Recommended Posts

So, per my research and Bill's advice, my plug and play assembly is 2 separate units that have common download software.  One unit is K thermocouples for my high and low thermocouples in my downdraft kiln.  The second is for atmosphere by way of oxyprobe and gas pressure.  The end result being a graph showing all 4 data points.  The purpose being  graphs giving comparisons between firings.  I realize this is geek tech tool in the extreme.  Also granting that it's not necessary and my firings are fine without it and I just want it to add an additional fun factor to my work,         It's my way.

Cool, huh?

Oh, yeah, it'll run about $600.  I probably won't pull the trigger until I have a new free standing sale.  Hopefully the BS will end this year.

Link to comment
Share on other sites

48 minutes ago, CactusPots said:

So, per my research and Bill's advice, my plug and play assembly is 2 separate units that have common download software.  One unit is K thermocouples for my high and low thermocouples in my downdraft kiln.  The second is for atmosphere by way of oxyprobe and gas pressure.  The end result being a graph showing all 4 data points.  The purpose being  graphs giving comparisons between firings.  I realize this is geek tech tool in the extreme.  Also granting that it's not necessary and my firings are fine without it and I just want it to add an additional fun factor to my work,         It's my way.

Cool, huh?

Oh, yeah, it'll run about $600.  I probably won't pull the trigger until I have a new free standing sale.  Hopefully the BS will end this year.

Ouch! Thought it was gonna be cheaper. Heck I think I got the full blown PLC below 1000

Edited by Bill Kielb
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.