Jump to content

Recommended Posts

I use cornstarch, dusted onto the slab before going onto shallow wood hump molds. Some of the molds are made from pine, some from mdf. I usually flip the slab from the board it's on onto a thick piece of foam then dust it with the cornstarch then press the wood mold into the clay on the foam. I then use a board and flip it (without touching the mold) over so it's now upside down. I rib the outside, sometimes add feet, and leave it alone until the clay releases from the wood in a few hours then lift the mold out. I can usually use the mold twice in a day. (I use fairly wet clay and live in a high humidity area)

Welcome to the forum.

Edited by Min
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.