Jump to content

Recommended Posts

I recently got a job to make an object that requires a 4-piece plaster mold. The design can be conceptualized as a extruded cylinder along a curved line that abruptly ends and is closed off at one end. The other end which will be open is where I will pour the slip. For some reason I cannot figure out how the air will be displaced as I fill the mold with slip, if you see my attached photo, is it possible to cast this object as it is designed? It's ridiculous that I'm having such a tough time figuring this out. I cannot use a sprue at the end simply because the object needs to be closed on that side. I am wondering if I would be able to cast it as designed and spin the mold around during casting to release the air from the end of the cylinder? I would love to hear how any of you would tackle this. The designed object is extremely simply yet I cannot figure a way to efficiently cast it as illustrated.

Any help or direction would be greatly appreciated!

Cheers, Cole

Screen Shot 2019-11-04 at 12.55.35 PM.png

Link to post
Share on other sites
8 hours ago, Rae Reich said:

Or cast both ends closed by having your pour hole on the bottom where it can be sealed later when you cut off the ends. You'll probably need some kind of flat area at the bottom, no?

yes make the bottom the pouring part(hole) and flip the mold upside down -the bottom can have the hole in it and will hidden and easy to clean up with both ends clearner as you are not cutting one off on poring end.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.