Mitzuuu89 7 Posted May 15, 2019 Report Share Posted May 15, 2019 (edited) Is there any thread regarding Mason stains samples? Would be great if other people shared their samples, firing temperatures, percentages and stain codes. here are my latest samples. Firing temperature: 1060 C Base: matte transparent glaze black turned brown for some reason grey sage turned grey blue Edited May 15, 2019 by Mitzuuu89 Quote Link to post Share on other sites
liambesaw 2,763 Posted May 15, 2019 Report Share Posted May 15, 2019 I like 6666 for black and it does need a little extra Quote Link to post Share on other sites
Cline Campbell Pottery 7 Posted May 15, 2019 Report Share Posted May 15, 2019 I've been told that many Mason stains don't survive cone 10 firings and burn out to black. But I've also found ^10 recipes that call for Mason stains as colorants. I guess that which colors can survive high fire varies with their chemistry, and that makes sense. Does anyone know which stains are hardy enough for cone 10 , which aren't and which vary depending on conditions? Anyone know how to find out based on other people's experience rather than doing my own tedious and expensive testing? Thanks, Cynthia Quote Link to post Share on other sites
neilestrick 4,605 Posted May 15, 2019 Report Share Posted May 15, 2019 The Mason web site has charts that show the max temp for each stain. Stains will react differently depending on the glaze, firing temperature, and firing atmosphere. Post the glaze recipe and firing technique along with your samples. Quote Link to post Share on other sites
Fred Sweet 172 Posted May 15, 2019 Report Share Posted May 15, 2019 (edited) Cynthia- As per Neil’s suggestion, check the Mason chart. Direct link is: http://www.masoncolor.com/reference-guide Pay attention to the note section, it will give you a lot of information regarding glaze composition and firing/atmosphere limits. Regards, Fred Edited May 15, 2019 by Fred Sweet Added comment about note section Magnolia Mud Research 1 Quote Link to post Share on other sites
tinbucket 42 Posted May 18, 2019 Report Share Posted May 18, 2019 (edited) Derek Au and Jake Corboy have tested an extensive number of stains in glaze and clay. The base chemistry can affect the color of certain stains (glazes with magnesium can turn chrome/tin [maroon to pink] stains grey) but this should give you a general idea. Scroll to the bottom of the page to see the different stains. These are all cone 6 oxidation. https://glazy.org/recipes/34778 https://glazy.org/recipes/18705 https://glazy.org/recipes/30094 Jake Corboy's website https://www.jakecorboy.com/all-testing-info This is an excellent matte glaze and there are a number of different stains tested if you scroll to the pictures at the bottom. https://digitalfire.com/4sight/recipes/matte_glaze_base_for_cone_6_121.html Edited May 18, 2019 by tinbucket Quote Link to post Share on other sites
Mark C. 4,863 Posted May 18, 2019 Report Share Posted May 18, 2019 I use a few masons stains in my fish for colors under a clear glaze at cone 10-the blacks work-I thin them for greys. I tested the pinks and they work as well for salmon color. Testing is key. I'm firing reduction Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.