Potter3ee Posted February 24, 2017 Report Share Posted February 24, 2017 I just bought an easy fire e18s kiln. I was going to do a test fire. I have one question. The instruction manual talks about spring hinges and things. We didnt disassemble the kiln. Do we need to follow any of these steps? We simply assembled the stand and placed the kiln on top. Am I ready for test fire? Link to comment Share on other sites More sharing options...
neilestrick Posted February 24, 2017 Report Share Posted February 24, 2017 That kiln does not have the spring hinges. It doesn't need them since it's so small. You do need to make sure that the kiln is not rocking on the stand. Put sheet metal shims under the feet of the stand as needed to get it sitting evenly on all feet. Open the control panel and make sure all the connections are still tight. Make sure all the elements are seated into the holders, especially at the corners. Then you're ready to fire. Link to comment Share on other sites More sharing options...
LeeU Posted February 24, 2017 Report Share Posted February 24, 2017 You will love this kiln, and the ease of programmng...I have a larger one and it just floats my boat to happy places. (and thanks Neil for your help along the way) Link to comment Share on other sites More sharing options...
Potter3ee Posted February 24, 2017 Author Report Share Posted February 24, 2017 Thank you. Im so excited !! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.