Search the Community
Showing results for tags 'wiring diagram'.
The control box was off when I acquired the kiln and I’m not sure where some of the wires go such as the two black ground wires in the top box section and the two yellow wires that come out of the heat switch in the top section. I’d like to get the panel reconnected to the kiln but the wiring diagram in the manual is a little confusing. I’m not see a interbox that the manual mentions either. I’ve replaced the tube assembly. I’ve attached photos of the control box. Please let me know what you think! https://freeimage.host/i/2Syhwg https://freeimage.host/i/2Syjta https://freeimage.host/i/2S
Last firing, sparks flew when the top switch was turned on which caused it to shut off. After taking off the panel, it looks like this wire had come loose and was touching the top switch terminal. Any ideas where to reconnect it. I tried calling Evenheat, but got a recording - have emailed them.
Hi, I hope someone can give me advise. I was given an old kiln. But all the wires were cut off at the back of the kiln and from inside the controller. The plaque with the make and model is also missing. My dad is an electrician and used to service my mom's kiln years ago, but need a wiring diagram to see how the wires should be connected. Any ideas ?