Search the Community
Showing results for tags 'stencil'.
Found 6 results
-
I'm using 4 mil Mylar stencils. Glaze tends to crawl under the edge of the stencil which takes a lot of work cleaning up. I have tried making the glaze quite thick with CMC. This is helpful but it is not getting the job done. I am careful to brush away from the stencil. Suggestions please -
I am using underglaze to create designs on newsprint underneath slip to form decals to apply to greenware. I need advice on how to avoid streaking underglaze.
-
From the album: Playing with mud 2016
White earthenware. Underglaze and Japanese tissue transfers used over negative cut stencil. Waiting to be glazed. -
From the album: 2016
Experimenting with bought tissue transfers and stencils as resist. Thrown white earthenware. Dipped in transparent glaze & fired to 1100oC in an electric kiln. -
From the album: 2016
3 creamers with cobalt tissue transfers applied through a home made stencil with transparent glaze over. Wedding favours - 2 test pieces (120 in total) glazed with Mayco Stroke and Coat. Individual name tags to be attached using teal ribbon. These are for my niece (a labour of love) - would never be cost effective as a commercial item, unless someone had money to throw away! Fired to 1100oC in electric kiln. -
From the album: Playing with mud 2016
Small white earthenware creamer decorated with Japanese tissue transfer over a negative transfer test I cut on my silhouette cutter. Not glazed yet. Blue and white with a modern twist.
