Search the Community
Showing results for tags 'patch'.
Hi there. I recently glazed some items on white stoneware clay. The clay (White Stoneware PF560) was glazed fired after being bisqued at : room --> 600 degrees C at 100 deg/c per hour 600 -> 1230 at 150 deg/c per hour 20 min soak It came out really patchy and there are some air bubbles. If anyone could recommend good firing ramp for this glaze in degrees celcis with timing that would be great - thanks so much Terracolor orange Ember - https://www.scarva.com/en/gb/Terracolor-FS6031-Orange-Ember/m-1772.aspx was the glaze that didnt look very good! Cla
I have 150 K26 soft bricks that have been drilled through with about a 5/8-inch hole on the broad side of the brick. I want to fill the holes and then reuse these bricks. Does anyone have a recommendation on what type of material/product to use? I have looked online and see that there are fillers intended for repairing small kilns, but these products are packaged in small amounts - too small - and by the time I'd buy it I'd have spent more than I'd be saving by salvaging the bricks I have. The bricks are to be used for a lid for a wood fire train kiln. The first design is failing and has to be