Search the Community
Showing results for tags 'iron'.
Found 14 results
-
Cheers! I thank you very much if anyone can consult. I don't know why in the black or red ceramic paste (which I have high temperature), my faldespatico base enamels do not cover this clay. The enamels come out with bubbles.., although in white clay they work well for me. I understand that black clays contain ox iron and manganese.. -
From the album: Clay Tests
© TJA 2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA2020
-
From the album: Clay Tests
© TJA 2020
-
-
-
Blending various blends of raw clay to set levels of titanium, iron, and calcium. The goal was to produce purple in oxidation: without the use of stains. A band of rutile was placed in the center, and Temmoku glazed over.© TJA 2017
-
From the album: Ceramics Fall 2016
I made 4 similar mugs from the recycled clay and iron filings in a glaze called moonlight. I have learned that a little goes a long way for the iron filings, and next time I think I will use less. Most of the filings came through on the inside of the cup, rusting slightly but covered thinly by glaze. Does any one else have experience with using too much iron filings? Do you feel it causes any safety hazards to the average human?
