Search the Community

Hi There, I'm working on some porcelain stud earrings and refrigerator magnets. What is the best glue to use to attach ceramic to non ceramic like metal and the magnets. In the past I have tried superglue, which didn't work at all and hot glue, which works but tends to pop off unpredictably on glazed pieces. I would like to be able to glue glazed ^6 porcelain. Thanks!

Background: I made oval earrings (oval shape with large oval cutout so they are more like an oval outline) (15 pairs) on the claybody Highwater Clays Little Loafers (Cone 6). I painted designs on them with Amaco underglazes. The tops of each have small holes (i'll put metal hoops them after they are all done). They have already been bisque fired. I also have three other pairs of earrings that have only small earrings. Goal: Now, I want to put a clear glaze on them and glaze fire them. Ideally, in one batch. What I have in my possession vs. what I could acquire. The clear glaze I already have is a Zinc-free Cone 5/6 glaze. However, I can get a different, low-fire clear glaze. I also have a bead rack I borrowed with some long rods that are too large for the small holes in the earrings. My question: I found this image online, in which someone made oval earrings very similar to mine and a bead rack with hooks. It appears they used kiln safe metal wire to make hooks. The hooks appear to be large but small enough to fit through small holes. I wonder what your opinion of that is. I'd have to figure out what gauge to get. A ceramicist nearby has a jewelry tree so I may take the bisquefired earrings over to her and try to see how they fit on her jewelry tree and that might tell me approx. the size wire those jewelry trees use and I could get the same gaugue, bend and make hooks out of them to hang on the rods. One potter has said this ^ should work if I order some nichrome or kanthal wire. They also think it would be fine to do with the Cone 6 clear glaze I have and would be fine to fire up to a Cone 6 (although we actually do Cone 5). Part of me wonders if I should just get low-fire glaze, try the hook thing, and low fire it to be on the safer side. Other solution: As I typed this, I just realized a possible other solution…1.) get a low fire brushable glaze, 2.) simply put rods through the large oval (taking care not to glaze the inside edge or anywhere where the rod will rest) instead of worrying about the small circles at all. It’s not as ideal but would probably hardly be noticeable. 3.) Fire at a low temp 04-06. That might work for the oval earrings but not for the winking eyes.