Search the Community
Showing results for tags 'corrosion'.
I have two kilns hooked to a vent. I am firing sometimes both kilns 4 days a week. I believe the hoses are both connected correctly (I use a damper), but would certainly not mind tips on ways to check. I am not sure now because the studio has a kiln odor and I sometimes have some smoke coming out when the wax burns off. I usually dip glaze and fire immediately. Could this be my problem. I just changed out some of the vent hoses as they eroded, so I am hoping that will help. I have been experiencing shortness of breath and coughing (especially when running) for a few years now but just assu
Wondering if any of you have experienced corrosion/rust of metal objects in your kiln space. My kiln is set up with a bottom mounted vent in a climate controlled studio that has a consistent humidity of about 50%, but I'm experiencing corrosion of my paper cutter, triple beam balance, and several other metal pieces. I'm a little concerned that something caustic in the kiln's off-gassings is causing this and that I'm breathing this same air. I'd appreciate your input.