Search the Community
Showing results for tags 'copper'.
Found 2 results
I have two kilns hooked to a vent. I am firing sometimes both kilns 4 days a week. I believe the hoses are both connected correctly (I use a damper), but would certainly not mind tips on ways to check. I am not sure now because the studio has a kiln odor and I sometimes have some smoke coming out when the wax burns off. I usually dip glaze and fire immediately. Could this be my problem. I just changed out some of the vent hoses as they eroded, so I am hoping that will help. I have been experiencing shortness of breath and coughing (especially when running) for a few years now but just assumed it was from previous years of bad studio practices. I thought that the vent and good cleaning schedule would take care of any issues I have, but it is not. Since I am doing production, I fire a mostly full kiln loads of copper glazed- green - pots and of course, bisque. Could this be sulfuric acid? I do see a good amount of rusting on equipment, but I am also near the coast and it gets very humid here. I would like to make my work environment as safe as possible. I also wear a P100 respirator in the studio but would love to be able to work unencumbered by the mask. Any help you can give me would be great!
I've been looking on the internet as well as a few books on crystaline glazes but what I'm looking for is a way to add shinny copper sparkles to a glaze over a dark color. Sort of what happens with Crystaline Ultramarine but just the copper sparklies. Thanks