Search the Community
Showing results for tags 'WOPL'.
I'm working with a clay that has a tendency to flop with little warning. From what little I know this can be a problem with plastic clay bodies holding more water than more forgiving, less plastic bodies. So with this in mind I'm looking at making adjustments but I'm getting conflicting information on what some accepted water content values are. Plainsman P700 has a % water of 23.5 - 24.5 Plainsman describes P700 as "our most vitreous cone 10 white body, it is the closest thing we have to a true translucent porcelain body. It is a mix of 50% Grolleg kaolin with feldspar and sili
Introduction of SAS Formulation - hypothesis The industry standard has been formulation based on particle size distribution (PSD), which includes density packing. The Zameck article proposed formulation based on the PSD principle; which included emphasis on density packing. However, particle size is a measurement that only determines the plane (face) of a particle, but does not include the depth. A sugar cube represents a perfectly square particle: which has the same plane and depth equal. Clays however can have the same particle size on the face, but vary widely in depth. So a large grain