Search the Community
Showing results for tags 'surface area'.
Found 1 result
Hi, this is my first post and I'm so glad to have found this forum! I have only a test kiln, so space is limited. I'm firing unglazed cone 6 porcelain pieces, all cylindrical and of similar size (each about 100 grams fired). I want to stack them directly on the kiln floor without the wares sticking to each other. Initial experiments with imperfect forms suggest that sticking will be a problem in the next iteration, when the forms will be more perfectly cylindrical and have greater surface contact areas. I had thought to use kiln wash on the wares themselves to prevent this, hoping to remove the wash with minimal effect to the finish of the pieces. I could just try this ... but I could also return the unopened bag of wash if, as I'm beginning to fear, the wash will adhere strongly to the wares... The pieces could be burnished or roughed going in, it's no great inconvenience either way. But power grinding post-vit would be over the top. Maybe some other substance would suit this purpose better? (This kiln wash is the standard 50:50 kaolin:silica combination.) Ideally, the wash would crack off like a husk, with no bonding interactions with the wares whatsoever. Just read about "shelf paper" for the first time today, and maybe some corrugated wrapping pattern with that stuff would work better? Or would it still bond?... (Today I read in a post on this forum that it's only used for glass, so probably bad idea? And then I read that you could use it but it's a particular health hazard?) Maybe the finish including bonded wash, with a quick sanding, would be acceptable. I could sort of stilt the pieces, placing little interstitial balls of clay -- pretty labour intensive loading, but that would reduce the contact area. But then sagging might be a problem there. Any suggestions will be savoured! Andrew