Search the Community
Showing results for tags 'cone06'.
Found 3 results
-
I’m new to ceramics and recently bought a used kiln that’s quite old but works like a charm. i don’t really know what the numbers on the knobs are and I’m trying to bisque cone 06 and glaze cone 6. I don’t have pyrometic bars for the cone 06 bisque so any help on what the numbers on the knobs signify and how to reach the desired temp would be awesome. (I do have glass cone 6 bars)
-
Hello! Does anybody have experience firing Standard Clay 112 or 182 to cone 06/6? These are the clays that I work with and typically my studio fires to cone 05/5. However, I have recently started working out of home and found a studio nearby that will fire my work, but to cone 06/6. I want to be sure that I like the result before committing to the change. -
If I could figure out how to attach the correct size photo you could see the what I’m gonna describe... Duncan Clear Satin (SN351) glaze is not running into all the incised lines after the recommended number of coats and fired to cone 06.. It looked completely covered. This has now happened a couple of times and I’m not sure what’s going wrong. The clay is Standard 528. The design was inscised then bisque fired to 06. It was then stained using Amaco velvet underglaze (V361)...allowed to dry before applying the Duncan clear glaze as per mfg. I’ve used this technique for a lon
