Search the Community
Showing results for tags 'Thermocouple'.
Hi all, first time posting. I recently aquired and olympic 1818HE with a Bartlett rtc1000 controller on it. I know the controller is made more for glass or heat treating kilns but have seen it used for ceramics without problem. I had a few error codes in my first two firings, the first was e3 during my final hold at cone 04. The code chart states that the temp fell 50* below final hold temp during the hold and the chart says that’s a relay failure. I did a full power test at r9999 to f1000 and all of the elements glowed a beautiful red. I assumed that beca
Hello everyone, I have bought a second-hand electric Rohde 5024 Kiln (230V) and a TR 305 controller. I have done only 2 biscuit firing at 950C and noticed the pieces were almost vitrified; our mocal clay is rich in iron oxide. I recently did a slow glaze firing at 900C and my work melted down, some kiln shelves are distorted and even broken by the heat. The kiln electric plug is stick to the wall socket.Do you have an idea of what has happened? The whole situation is devastating as I live in West Africa and do not have potters, technicians or manufacturers who know ab