Wendy Hami
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
Blogs
Gallery
Posts posted by Wendy Hami
-
-
So are you suggesting that he could or cannot change the plug, and use that male outlet to fire up to cone 6? I’m a bit confused. His amp is 50, and he says that outlet is direct into the electrical box. That male outlet says 250v and 50 amp. So I’m lost. …
-
Hi Neil-
Thank you for your help..
He said its on a 50 amp breaker, and it's 220V. But I looked at the female part it would plug into and it says 50A-250V.
I'm in Horsetown USA...(Norco, CA).
-
I have an older High Fire Cress kiln with a newer Cress Electric (programable ) 10 key touch pad.
Model: A-22-H
Ser#: 6511
Volts: 230 AC
Amps: 22
I've used it before, but my boss wants to know if he can change out the plug (male) and replace it with a new male plug that would be the same as his female outlet, (his 220V welder outlet), in his workshop?
His idea is to just replace the plug end not the cord....so I can fire. The pic attached is of the old plug he’d like to replace.
Older Cress Kiln Electric Plug vs Wall Receptor
in Equipment Use and Repair
Posted
Ok. Thanks for all the helpful advice..