Jump to content

Meredith London

Members
  • Content Count

    15
  • Joined

  • Last visited

About Meredith London

  • Rank
    Member

Profile Information

  • Location
    London

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I got it out! My pottery teacher helped me out - we dripped more water, just a teeny bit at a time into the hole from top and bottom, let it sit for a moment and it evenutally came out - but the piece did separate at one of the joins, we mended it and shall see how it comes out - may well have cracks... hopefully glaze will fill it in - Thanks for all the suggestion!
  2. I was using this paintbrush while hand building and it has been in there for a few days. I cannot get it out. I tried a bit of water, I tried poking wire alongside it. any ideas? what if I trim off the metal top and fire it as is???? https://pin.it/1A06pBh
  3. yes, absolutely - i just totally forgot to sort out the bottom, I hand built it and normally throw - when I throw I have a proper trim session but with this guy I just sort of blanked on the bottom trim and totally forgot...it was too thick, possibly a bit wet
  4. thanks - i am always very attentive to the bottom of my pots that I throw - but this was a large hand built pot i made over the course of many sessions, i just totally neglected it! Lesson learned!
  5. Wipe down, then open for fresh air so the fresh air doesn't just send things into the atmosphere. Also breathing well (basic yoga & pranayama) and perhaps a simple saline nasal spray on days when you think there has been dust. The air filters are great as long as they aren't too blow-y. Humidifiers can help. I use essential oil diffusers in my workspace. Come up with a workable plan, don't worry too much! You are right to look after your health, but just don't let that make you nuts!
  6. Fresh air is good AFTER you have mopped up. Otherwise it will just get all the little particles sitting on stuff into the air. Wipe things down, then open the doors/windows. You need a really great playlist to listen to for the wiping down process!
  7. How would you add the vinegar? Like when you are wedging? I have allergies and I need to watch this stuff...I am unsure how to best to store the clay after I open the bag...
  8. Thanks...you do that with the polishing disc after bisque and/or glaze fire? I'll have to get one of those...I think I have been neglecting my bottoms!
  9. Hi community... I am in the midst of planning a studio building for ceramics. At the moment I have a very, very cold workshop room off my pantry that used to be a coal (ground floor, with its own door) cellar so quite raw, cement floor, brick walls. I have various tools in there, some of my work and my kiln. I am working in my dining room at a large table and using my credenza and window sills for putting works in progress. This is a temporary situation and I am focusing on ceramics as an artist more and more. I want to build a studio outside the house and have been trying to wei
  10. I am wondering if it happened because either or possibly both - the bottom wasnt entirely dry, I fired a bit too hot - instead of a cone 06 for bisque, I did cone 6....
  11. Yeaaah...I will be making more/am making more.....but I wouldn’t mind learning any repair techniques and I really like the rest of the pot.
  12. After I bisque fired this pot the bottom splintered off a bit. I reattached some larger pieces with clear glaze before the glaze fire and they worked out fine BUT I still have these gaps. Plus I really slacked on trimming Photo / Photo Suggestions to fill gaps and tidy it up a bit? It’s a white stoneware clay. I did find some pieces and can slot in; Photo many thanks!
  13. Hello, I have a new L&L Fuego kiln, I did a test firing. The kiln has standard settings for bisque and glaze, bisque is cone 04, glaze is cone 06 - I can programme it differently, but starting out with the their settings. I bisque fired some small vulcan black clay pieces using the glaze setting because I read that the clay required that temperature. I was surprised with the colour, expected it to be more black. Then I glazed them with clear glaze, and two different celedon glazes and put them through a glaze fire again. An electrician (annoyingly) shut off the kiln an
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.