Jump to content

Matt Oz

Members
  • Posts

    310
  • Joined

  • Last visited

Profile Information

  • Location
    Michigan

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Matt Oz's Achievements

Advanced Member

Advanced Member (3/3)

68

Reputation

  1. Here is a post from an AMACO engineer on this subject. and here is the thread it is from....Anyone Use Amaco Potters Choice Saturation Metallic Or Gold?
  2. Here is another Ferro chart from their web site. http://www.ferro.com pottery frits 2008.pdf
  3. I'm one of those lucky people who almost never get sick (fingers crossed), and have happy memories of making mud pies.
  4. From what I remember that controller didn't have much memory, so had a limited number of ramps per program. I think candeling or a slow start had to be a separate program, but I could be wrong. A ramp of 204oC looked to fast to me so I never tried it, I haven’t experimented around much with different rates. After a 60min soak at about 80oC, I do the almost 150oC \ hr (300oF) to temp for bisque. There are so many different firing schedules out there from manufacturers and potters, I find it confusing.
  5. Here is a link to the manual, different kiln same manual though. Perfect Fire Operators Manual
  6. Excellent, I like the contrast with the foot ring.
  7. Thank you, I'm glad they look yummy, I only use pure can sugar in the recipe.
  8. I did a Google image search for climbing cats, I think this is what you are looking for, they are Camark cats made by Camark Pottery. Here is a blogger who did research on it....Those climbing cats
  9. Matt Oz

    Tree lamp day

    Thank you Frederik. I had a photo of a lit lamp, but it wasn't very good, so I posted a new one that's a bit better. One of these days I'm going to have to buy a newer camera.
  10. Offcenter, I agree, it is difficult to show. I thought your video worked well, movement seems to help. I have not yet used Frost or Ice, but I have done many tests using the same New Zealand kaolin, and as far as I can tell using this clay body with NZ kaolin should be more translucent than them, but only because this clay is so highly fluxed and has lower clay content. It has to be fired in a form, or on something flat, and is actually glassy when mature. Thanks for your question. And thanks Trina
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.