Jump to content

Fusionous

Members
  • Content Count

    10
  • Joined

  • Last visited

Everything posted by Fusionous

  1. yep, letting it dry on the plaster wall creates a "piece" which somehow wont blend with the 2nd layer of slip i pour in. This creates like a line between the 2 layers
  2. I am using a 1-piece mold, painting is abit difficult to do. So if i understand correctly, it is to make the marble first and then pour onto the greenware? If i let it dry, it will cause crack, as if theres 2 layers of clay
  3. on the 2nd picture i think, theres a small little red dot which is the red slip and the pale pink which is the pink slip and the slip is greyish when wet and becomes white when bone dry
  4. Hello everyone! A question & issue: made my own plaster mold and tried marble slipcasting, but, when i tried the marbling technique, the marbling seems to disappear after i poured white slip in. I tried to trim the slipcast pot but the marbling is gone... did the colored slip blend into the white slip? What i am trying to achieve here is to have the base white, mid section to have the marbling and then the top to be white. What i did: Poured white slip at base, create a layer of white base, pour out white slip poured in colored slip (pin
  5. Thank you all, it helped me and the model i am choosing will be probably Nabertherm. The aurora elements shows error 1 after 2 years of usage which is a short life span. Therefore I am switching over to Nabertherm for that intent... Hopefully I will be able to master to controls for the Nabertherm
  6. Hello, I am currently using potterycrafts 40lt aurora kiln and i would like to upgrade but I found there are no reviews for the respective kilns. Comparing both brands for the 60lt, could anyone provide a brief review on which one is better? Thank you.
  7. Thank you for your replies bros and sis! Oh my yes! This is the one! I tried using 2 clay bodies but the effect is wispy at all, therefore is there any method I could try with? I don't know the exact method those people used but if I was making those I would take 2 casting slips (made from the same clay), of what ever colours and pour a slowly rotate the 2 slips into the mold. Coating the inside of the mold to the top to create a shell of slip. Once that had set up a little I would then pour an unstained slip into the mold and let it set up until wall thickness is adequate then dump out the
  8. The effect with scrapped marble is that it doesn't have the wispy effect, maybe it's like a wet glaze and use something sharp to "draw"?
  9. Thank you for your replies bros and sis! Oh my yes! This is the one! I tried using 2 clay bodies but the effect is wispy at all, therefore is there any method I could try with?
  10. http://i.imgur.com/Qwn2HPQ.jpg This does not look like two clays wedged together... is it color slip or underglaze? How can I achieve this? Advice would be much appreciated!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.