lgusten
-
Posts
65 -
Joined
-
Last visited
Reputation Activity
-
lgusten got a reaction from Pres in QotW: When do you decide?
I start with daydreaming....see some images in my head and play with them. Then I sketch...because I will never remember the details of a daydream. Then I mess around with the clay to see if any of the ideas really have merit...it takes awhile but I sometimes I can get some good results. I also use props...fancy word for old junk that I collect that has a pleasing form or detail that just screams out to be part of a pottery project.
-
lgusten got a reaction from Magnolia Mud Research in QotW: When do you decide?
I start with daydreaming....see some images in my head and play with them. Then I sketch...because I will never remember the details of a daydream. Then I mess around with the clay to see if any of the ideas really have merit...it takes awhile but I sometimes I can get some good results. I also use props...fancy word for old junk that I collect that has a pleasing form or detail that just screams out to be part of a pottery project.
-
lgusten reacted to JohnnyK in QotW: What tool or piece of equipment non related to Ceramics would you recommend?
How about a large plastic storage tub with lid made into a Damp Box? Mix enough potters plaster to make about a 2" layer in the bottom and after it sets hard, add a cup of water to the tub. (I add about a cup of water every 4 to 6 months and as long as I keep the lid closed, that's all it seems to need to keep things moist.) I checked mine today and I have a pair of bowls that I threw in 2013 and they are on the damp side of leather hard...too soft to trim. I want to see how long I can keep them there before they start to fall apart. Place the box on a dolly from Harbor Freight and it can be rolled anywhere!
-
lgusten reacted to Pres in What’s on your workbench?
Hi folks,
I have been doing some thinking about the white liner glaze that I have been dipping the hazelnut and the white clays in before spray glazing. So I decided to try a piece without glazing the whole piece in the white glaze, just the inside and neck. I think you can see the difference. Seems like to me, the white is bleaching out the cream rust glaze here, pieces I had sprayed with the cream rust, the variegated blue and the rutile green would always be more blue and green. Interestingly enough, the hazelnut pieces would have more browns in them.
best,
Pres
-
lgusten reacted to Pres in What’s on your workbench?
Reposted as I had it in the wrong strand! These are a few from the last load.
best,
Pres
-
lgusten reacted to LeeU in QotW: How do you feel about culture theft?
I want to say something about language. It is essentially ingrained & inherited from how and where and with whom we grew up and hung out with. When someone like me (old school NY street life) says things like "look, pal", or a southern waitress calls me "sweetie or dearie", we are not name-calling. It is just habitual expressiveness that has not been willfully changed. I used to say "F- this and F-that, you M'rFk'r (which is now more commonly expressed as mofo--go figure!) repeatedly, every sentence, non-stop. And I could not stop--had no reason to, and then when I did have a reason to, it was rough. I had to be taught how to change my world view, my stance in the world, and my mouth. I had to--painfully, I might add--practice, practice, practice, literally for years until I could speak like a decent mainstream person in a variety of settings and communities.
Most of us have a working brain-it is not about having the smarts, even tho using certain language can make one look stupid, or aggressive, etc.. The waitress saying "Can I get you more coffee sweetie" and me saying "Look, sister, I'm not your sweetie" are really the same thing. Except it sets us worlds apart (like different cultures around the globe) , and maybe at odds with each other, as I think she's of low intelligence and she thinks I'm a biker's broad.
So with all due respect to everyone---I see nothing in this thread that is less than civil. I hope that as group members, we are not being required by moderators to become hyper-vigilent and super-sensitive about what we say or how we say it (or how Lee writes stuff-which is quite hard to reign in from my natural style-seriously). I hope there is some reasonable wiggle-room, so we can be "who we are".
If someone is offended, I trust they can speak up for themselves and with private messaging, we can usually work it out. If it is perceived as offensive and ongoing, we can report it to a moderator and they can handle it politely and privately. When it can't be worked out, either the offender or the offended will leave the group. Isn't it partly how things were said (and badly misinterpreted, in my opinion) that provoked the loss of some great foundational members/mentors/experts not all that long ago? Compassion & respect are as perceived, as delivered and as received; they not always clear absolutes that are identifiable by all as such, on both the delivering and receiving ends. Lee's rant of the day-or, to put it in a more paletable form, just some food for thought.
-
lgusten reacted to oldlady in QotW: How do you feel about culture theft?
off topic but i WANT that sofa!
-
lgusten reacted to Callie Beller Diesel in QotW: How do you feel about culture theft?
If you know anything at all about Native American culture, you know that a 19 year old white girl running around Coachella in a feathered headdress is like dressing up as a "sexy decorated war veteran" and going to a Remembrance Day ceremony. It's super disrespectful, and it's in really bad taste. There's always going to be someone who says "hey, I don't mind looking at that," or "what's the big deal? It was meant as a compliment!" but if it's your culture and your tradition, you know more about it than an outsider. If someone says "hey, the way you're doing that is not okay!" as an outsider to that culture, you need to heed that. You don't get to tell someone else what they should or shouldn't be offended by if you have less knowledge on the subject. As an outsider to a culture, you may be well meaning as an individual, but many things have been done with good intentions that had catastrophic outcomes for the people on the receiving end.
There are some really big holdover attitudes from British colonialism to just assume that another culture's artworks, religion and traditions all carry equal weight within that culture, or that the weight placed on those things are somehow analogous to how we behave in our own. In a lot of cases, it's not true, and I think that's where white folks tend to get frustrated and confused. We lack important, accurate information, and it's a serious effort to track that information down because there's a lot less in depth information recorded about other cultures than the dominant one. So we do dumb things in the name of trying to learn about something that wind up being hurtful.
But what about artistic growth and cross-cultural influence? What about all the cross pollination that happened between China, Japan and Korea in terms of celadon development? What about blue and white ware's influence on middle Eastern ceramics? How about a more modern phenomena of European Christian missionaries going to Japan and teaching the locals about knitting, a handcraft they hadn't developed themselves yet? Japanese knitting patterns are now some of the most interesting and challenging out there, and the colours used in the yarn choices of Japanese knitting designers definitely shows a distinct sensibility from European choices.
That kind of cultural borrowing is totally okay, because no one places a religious or spiritual value on knitting. There are some interesting cultural traditions around knitting design, but the motifs that are traditional in different areas generally don't have a deeply emotional/spiritual significance attached to them. There is an active conversation being had between the two cultures. Or, in the ceramic cases above, there were some shared cultural points (Zen Buddhism throughout Asia) where people were starting from, and then taking the techniques in their own directions.
So I suppose I think cultural inspiration is possible to do responsibly, but you have to be willing to put a LOT of work into the research and learning part in order to be properly informed. I think it's best to had some direct, meaningful contact with that culture. It ought to mean something to you personally, and not just be a cool subject you learned about in school or in a book. I think you also have to not look at the specific motifs or techniques that are being used, but look at what the artists that use them are looking at and being inspired by. You have to be able to continue the conversation that's being had in that area with your own voice and contribute something intelligent to that conversation.
Otherwise, it's like Liam says and you're just profiting off someone else's ideas, which isn't cool.
-
lgusten reacted to glazenerd in QothW: how often do you introduce new forms, and does that change throughout your career
I throw forms to practice and to test crystalline: the bowls mostly go to family members- 0 profit margin. The shows and shops around here are stuffed with $10 mugs, no need to even attempt competing.
i still make geometric tile: I rarely sell jobs; but when I do $$$$$. It works for me at the moment. I am currently working on a geometric pattern consisting of 12, 8, and 4" interlocking circles. The added bonus of having a professional CAD system, with a 24 x 36 printer- I can create precise cut sheets. One of my favorite patterns - makes for a beautiful shower.
-
lgusten reacted to Mark C. in What’s on your workbench?
The public always needs help with what the heck is it for items.
-
lgusten reacted to LeeU in QothW: How do you see yourself in clay?
Ha....this one was made just for me! These are face-pressed. The white one is slip cast, the next is porcelain w/clear and Pallidium glaze, next is stoneware with granite dust , multiple firings, micro glitter & a bit of gold enamel (mounted in an open frame); the last was angama-fired. HMS is my Hidden Mask Series--a bit of self-absorption with therapeutic properties. The mask concept, using my own face, emerged in defiance of the ceramics instructor who told me "Art is not therapy" (no, art is spirituality in drag) and wanted me to quit because I was falling apart a bit at the time and I was arguing that I should be allowed to hand build if I didn't want to throw. Titled in order: Art Is; Two-faced Selfie; Assembling the Surviver, and; Emerging.
-
lgusten got a reaction from D.M.Ernst in QotW: Either generally or specifically, what do you think, feel, and/or do when confronted with moderate to serious/severe limitations of some aspect of health that alters how you work in clay?
Gabby, I cannot begin to imagine how you do it....or any of you who have experienced or in the midst of experiencing great medical challenges. My heart goes out to you all.
My troubles are small in comparison. I am 61 for a couple more months and have always used my hands whether in fiber arts or 25 years of restoring ceramics and making ceramics for 15 years... all stuff that is hard on the body. My hands, wrists, back and shoulders have given me trouble for many years . Most of the time I don't think about it....it is my normal.
I had to put the studio on hold for a few years for a variety of family and financial reasons, but with the arthritis pain increasing in my hands, I feel driven to get moving on getting my studio up and running and me back to making pottery....the road before me doesn't seem without end like when I was younger. I just want to be able to give my craft a good 25 to 35 years....or as long as the hands and back hold out.
Oh....I hand build.....there is something very comforting about building with the clay...cut and formed very much like the textiles I worked with years ago.
Thank you, Pres for starting this thread.
-
lgusten reacted to Stephen in QotW:What is the value of formal education in developing Ceramic skills?
amen to that. I can't imagine ever truly retiring, maybe slowing down a bit but not retiring.
-
lgusten got a reaction from Chilly in QotW:What is the value of formal education in developing Ceramic skills?
Yappy, while I agree that those who are poor do not have an equal opportunity for higher education today, I think that not all folks that had the good fortune to earn a degree are bad because of their good fortune. Rather it is the artists, gallery owners, sometimes collectors who only value the piece of paper and do not accept those who learn their craft through different channels . This type of condescension reflects on their personal issues and their insecurities and not education.
I was fortunate to attend college in the mid 70's with scholarships and grants (that would not begin to cover the costs these days). To please my family, I took art classes but did not major. My experience was a series of very condescending art teachers that belittled whatever we did. I was never able to afford to go back to college again....needed to keep the roof over head and eat. But I still had the fire....even without the degree...worked with textiles. Never gave up thinking about art as a career.
Fast forward to 2001...I moved to Winston-Salem, NC....they have a community art school, Sawtooth...they teach ceramics. I was able to take some classes to learn basic techniques, asks questions, pursue some of my own ideas...and ask more questions. Everyone I worked with was willing to help anyone move along on their artistic journey. So I would call this art education invaluable. Informal only if that means no degrees offered but the education is key to my basic understanding of the craft. Now it is up to me the learn the nuances...find my voice....listen to other potters ...and not worry about the piece of paper.
-
lgusten reacted to LeeU in QotW:What is the value of formal education in developing Ceramic skills?
I avoid juried groups and exhibits and try not to succumb to doing local art shows. It's just not for me. I was exposed to the "art scene" in NYC and VA and there is nothing about the whole milieu that I care for, especially the lifestyle that can come with it in some places, if one gets caught up in that.
The most valuable learning I got from my formal education (a state school) in ceramics was being taught the necessity and practice of critical thinking, and vetting for myself any assertions before buying into something, (like the mass mis-perception that Picasso is a great and revolutionary artist-sorry, couldn't resist). The first time I heard an excellent art history presentation on what was beyond the surface in a 15th century painting, where the fly on the pretty piece of fruit was actually a socio-economic commentary on the deterioration of the culture at the time, I realized that art is often about more than "what you see is what you get " or what I like or don't like--that formal education about art--making it, understanding it, and appreciating it--is important.
When I learned how to center and throw, I also learned about the great potters throughout the centuries, and clay artists working with non-functional objects. This was amazing to me, and without the BFA degree program I doubt I'd ever be enlightened about the depth of possibilities for making things of clay and other materials, or the impact of art on the world. That is not to say that probably a high percentage of the learning could be acquired outside of a formal educational process, with free lectures, Youtube videos, decent local studio classes, local guilds etc. , and maybe easier to handle cost-wise , assuming there is a drive to make self-education a priority. I often say something is not either-or, it is yes-and, and I thin k the viewpoints in this thread fit that perfectly--great discussion!
3 hours after I wrote the above, this popped up on my FB feed: ""The true purpose of arts education is not necessarily to create more professional dancers or artists. It's to create more complete human beings who are critical thinkers, who have curious minds, who can lead productive lives." -- Kelly Pollock
-
lgusten got a reaction from Pres in QotW:What is the value of formal education in developing Ceramic skills?
Yappy, while I agree that those who are poor do not have an equal opportunity for higher education today, I think that not all folks that had the good fortune to earn a degree are bad because of their good fortune. Rather it is the artists, gallery owners, sometimes collectors who only value the piece of paper and do not accept those who learn their craft through different channels . This type of condescension reflects on their personal issues and their insecurities and not education.
I was fortunate to attend college in the mid 70's with scholarships and grants (that would not begin to cover the costs these days). To please my family, I took art classes but did not major. My experience was a series of very condescending art teachers that belittled whatever we did. I was never able to afford to go back to college again....needed to keep the roof over head and eat. But I still had the fire....even without the degree...worked with textiles. Never gave up thinking about art as a career.
Fast forward to 2001...I moved to Winston-Salem, NC....they have a community art school, Sawtooth...they teach ceramics. I was able to take some classes to learn basic techniques, asks questions, pursue some of my own ideas...and ask more questions. Everyone I worked with was willing to help anyone move along on their artistic journey. So I would call this art education invaluable. Informal only if that means no degrees offered but the education is key to my basic understanding of the craft. Now it is up to me the learn the nuances...find my voice....listen to other potters ...and not worry about the piece of paper.
-
lgusten got a reaction from Rae Reich in QotW: Either generally or specifically, what do you think, feel, and/or do when confronted with moderate to serious/severe limitations of some aspect of health that alters how you work in clay?
I always have a bag on the table where I working to place scraps which I try to add as I go so they are not dried out. I mist inside the bag. So the clay says moist. When I have enough, I plop the contents of the bag out and smoosh (Technical term) the pieces together into a rectangular shape. Then I set the roller on high setting then roll, then set it lower and position the clay the opposite way and roll again....and do this again until I reach the thickness I want. What I found about changing the direction each time was that I reduced the amount of air pockets. I also waste very little clay and don't generate so much dust.
-
lgusten got a reaction from Rae Reich in QotW: Either generally or specifically, what do you think, feel, and/or do when confronted with moderate to serious/severe limitations of some aspect of health that alters how you work in clay?
Lee, I like the notion of knowing that we are not alone. We can still be creative and support each other's journey. Finding ways to move forward despite the odds is acting creatively. Gabby's idea is a good one. Does someone teach pottery making in your area? A interested student may want to help just to add to their education.
Acceptance of the physical limitations that our bodies are putting on us is very difficult for me. I worked on the wheel for a short time several years ago but stopped because of the pain in my hands....ended up have surgery on my right hand...nothing as extensive as Mark C and Johnny K have had done...but serious enough for me to examine how I work with my hands. I still experience weeks of downtime if I overdo it. Was thinking for a while that I would not be able to make pottery. That was a depressing time. After feeling sorry for myself for a while...decided to figure out how to rearrange my life so that I can follow my dream of making pottery. Here's what I got so far: We have stopped taking large and heavy work in the restoration business ....yeah, we can do it, but the downtime needed to recover is not productive. When was doing my work at a local community art center, I started testing out using their big Bailey slab roller to help with wedging....works great....so I saved up and bought one of those. Also, I have chosen to go with a small kiln to start, it has 15" shelves (I don't always make large things...It will also challenge me to come up with creative ways to design and make something large. I have the name of a guy who can help with the big gardening things I do...like move the giant plant pots or big plants. I am even researching easier plants or shrubs to grow in the yard so that I can maintain the use of my hands.
Thanks to all for sharing.
-
lgusten got a reaction from yappystudent in What’s on your workbench?
Love the pic. Maybe your cat wants you to make a cat bowl.....he/she has already stamped it.
-
lgusten reacted to karenkstudio in What’s on your workbench?
Working on found object texture tiles to be raku fired and assembled for a wall hanging.
-
lgusten reacted to oldlady in What’s on your workbench?
making a combination of things. big pieces with leaves and birds and small, about 3 inches across lace impressed bowl shaped "containers". the small items will sell if i can get a nice glaze in several colors. the bigger ones also sell, depending on the venue. but the small stuff is my version of mark's sponge holder bread and butter item. not that they hold sponges, just that they sell quickly and bring in cash.
got to make some glazes!
-
lgusten reacted to Min in What’s on your workbench?
Thanks for posting my question Pres.
hanging planters for succulents
-
-
lgusten got a reaction from yappystudent in QotW: Either generally or specifically, what do you think, feel, and/or do when confronted with moderate to serious/severe limitations of some aspect of health that alters how you work in clay?
Thanks for sharing so we can all celebrate your good news!!!
-
lgusten got a reaction from Pres in QotW: Either generally or specifically, what do you think, feel, and/or do when confronted with moderate to serious/severe limitations of some aspect of health that alters how you work in clay?
I always have a bag on the table where I working to place scraps which I try to add as I go so they are not dried out. I mist inside the bag. So the clay says moist. When I have enough, I plop the contents of the bag out and smoosh (Technical term) the pieces together into a rectangular shape. Then I set the roller on high setting then roll, then set it lower and position the clay the opposite way and roll again....and do this again until I reach the thickness I want. What I found about changing the direction each time was that I reduced the amount of air pockets. I also waste very little clay and don't generate so much dust.