Jump to content
From the album:

Finished work

  • 8 images
  • 15 image comments

Photo Information for Best results firing 9.jpg

Taken with Panasonic DMC-LZ6

  • 6.1 mm
  • 10/150
  • f f/2.8
  • ISO 200
View all photo EXIF information

Recommended Comments

TY for asking -these are all pinch pots but for bigger vessels I use plastic bowls as slump molds. The biggest green dish at the bottom is exactly 5 inches across, I used the bottom half of a fancy bottle to partly form it around and give it some pattern, then pinched out the edge. The top right and top were both stamped. The fish on the left was wax resist over black underglaze with a gray overglaze, wish it was that nice on the outside. 

Link to comment

yappy, if you use some sand for weight in the fancy bottle you can press it into the clay over some deep foam rubber.  i still have a big piece from a sofa cushion someone put out for trash 10/12 years ago.  if you have already cut the bottle that won't work well due to the brittleness of plastic bottles.

Link to comment

@oldlady, I have some foam around somewhere. I take it the weight of the sand does part of the work and you use a slab first? Doesn't it get stretched too thin in places? I'll have to give it a try. I used a decorative glass bottle but seems like it would work the same. 

Link to comment

yes, a slab big enough for the bottle to press into the foam.  the sand gives it some structure if it is a thin plastic bottle that would otherwise deform when pressed.   stretching does not hurt  the slab.  my flat boards have sharpish 90 degree angles and only one in hundreds actually creases into a split at a corner.  look at my personal gallery.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.