Jump to content


augal

Member Since 27 Jan 2017
Offline Last Active May 18 2017 07:39 PM
-----

Posts I've Made

In Topic: Kiln Wiring 3Phase To Single Phase

30 January 2017 - 06:53 PM

thank you for your help. 


In Topic: Kiln Wiring 3Phase To Single Phase

30 January 2017 - 01:25 PM

yes that is the kiln i have


In Topic: Kiln Wiring 3Phase To Single Phase

30 January 2017 - 11:27 AM

Neil I cannot find watts anywhere on the plate i can give the serial number on it . I just found your reply sorry i was slow to respond 


In Topic: Kiln Wiring 3Phase To Single Phase

29 January 2017 - 07:04 PM

 neilestrick :this is what i sent. i agree it might help someone with the same issue. 

 

On the front plate is model af 2431 3” 208v 45amp three phase.  It has now been wired to one phase.  The resistance on the element wire he had me test read 11 . the kiln is 31 across and 36 ½ tall. I am looking to see if I still have the photos before and after wiring I cleaned out photos and may have deleted them

The 70 amp breaker is wired to a junction box with 16/2 wire.

 I understood that the elements were the same in this unit, they were not changed out and that did not seem to be a concern in the conversion.  the man who helped me was very nice and he went above and beyond to help me.  Yes it is my kiln in my shop at my residence. 


In Topic: Kiln Wiring 3Phase To Single Phase

29 January 2017 - 06:45 PM

I am sending the information to your email if that is ok