Jump to content


Mark (Marko) Madrazo

Member Since 10 Aug 2014
Offline Last Active Today, 08:44 PM
*****

Profile Feed

Photo

Mark (Marko) Madrazo

I can up load pictures to Gallery.
Mar 16 2017 07:41 PM
  • GiselleNo5's Photo
    GiselleNo5
    Can or can't? Not sure if you're happy or having trouble! LOL
    Mar 18 2017 02:19 PM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Hahaha, couldn't. Must learn to spell check more. I'm ok. LOL
    Mar 18 2017 03:28 PM
  • GiselleNo5's Photo
    GiselleNo5
    Ahh. Did you figure it out? The gallery is so finicky. :(
    Mar 18 2017 08:22 PM
Photo

Mark (Marko) Madrazo

Ordered a 3D printer kit. So I will assemble it and make a clay stamp. Probably take about a week to get it.
Mar 11 2017 10:14 PM
  • Denice's Photo
    Denice
    My son bought a broken one at the DAV and fixed it. Wore it out and fixed it again. Then it was broken in a move and he had to fix it again. They took it to the remote island they live on so they can print our anything they need.
    Mar 13 2017 12:59 PM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Smart kid.
    Mar 13 2017 03:56 PM
  • Joseph F's Photo
    Joseph F
    3d printers are so awesome. My son wants one so bad. Hope it goes well for your mark.
    Mar 13 2017 03:57 PM
Photo

Mark (Marko) Madrazo

Back to the drawing board. I fired a kiln to ^6 with a pyro barin my sitter. New sitter, new everything, except infinite switches (no long can get), but it never got there. Brand new elements. It was firing fine till last nite. It's still cooling. Going to fire in my small kiln to finish an order. And work on the big kiln. I will fix it or try basket weaving in my padded room.
Mar 05 2017 12:10 PM
  • GiselleNo5's Photo
    GiselleNo5
    :( :(
    Mar 06 2017 08:08 PM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Yup. I just wonder if the weather had anything to do with it. We had some very heavy downpours Saturday when I was firing. No lighting. the barometric pressure was at 30.30. The humidity at 84%. Guess it could be that my kiln was, a bit under the weather, LOL.

    I fired the small kiln today @^6 and it went well. Nice day. I am going to fire another load in the big kiln tomorrow ^6. small load. If it doesn't go well I am going to check all my wiring.


    Mar 06 2017 08:30 PM
  • GiselleNo5's Photo
    GiselleNo5
    I will only fire bisque ware in my dad's big kiln. It has too many hot and cold spots. Sometimes there has been a four-cone variation between the top and bottom shelf. Too unpredictable. So I fire many small glaze loads.
    Mar 07 2017 03:33 PM
Photo

Mark (Marko) Madrazo

Kiln cooling. Happy tomorrow? LOL
Feb 22 2017 12:48 PM
Photo

Mark (Marko) Madrazo

I just started working with a ^5 laguna that I took to ^6. got some translucency. but not overall. Guess I need to go thinner. Help
Jan 30 2017 10:18 PM
  • glazenerd's Photo
    glazenerd
    I have been teaching myself to use less water. I set out one cup of water to throw 3-5lbs of porcelain. It forces you to use less water.
    Feb 03 2017 08:23 AM
  • Chris Campbell's Photo
    Chris Campbell
    Going with the original question .. which Laguna clay are you trying to get translucent?? Not all Cone 5/6 porcelain will be no matter how you fire them.
    Feb 03 2017 03:28 PM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Chris, TBH, I don't remember. I had thrown the box away and without thinking about what clay it was. I know it was porcelain because I maked it on the bag that I had soaked in a 5 gal bucket. Mystery Porcelain:P. I like working with it. I get my clay from either, http://www.roadrunnerceramics.com/ in San Antonio or http://www.armadilloclay.com/ in Austin, Tx. This clay has some translucency in some parts. I would love a recommendation.
    Feb 04 2017 06:27 PM
Photo

Mark (Marko) Madrazo

Yea, first test, ^04, fired great. I rebuilt my small kiln, Paragon A-82B, new bricks, elements and controller rewired with new infinite switches. Now I go for the gold, ^6.
Jan 21 2017 12:52 PM
  • glazenerd's Photo
    glazenerd
    Happy prospecting!
    Jan 22 2017 12:28 AM
  • LeeU's Photo
    LeeU
    Nice!!
    Jan 22 2017 10:23 PM
Photo

Mark (Marko) Madrazo

Had laser surgery on my left eye due to retinal tears. The floaters are annoying me.
Jan 15 2017 01:58 AM
  • oldlady's Photo
    oldlady
    mark, have always had them but when my cataract surgery was done in 02 they mostly disappeared. until an accident when i hit the tree going over the edge of the road. i think the surgeon stirred up the stuff inside the eye.
    Jan 15 2017 11:49 PM
  • Roberta12's Photo
    Roberta12
    Are you recovering from the surgery? Yep the floaters are a pain, but you can still see the clay, right??

    Jan 16 2017 09:08 AM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Yup, visions fine. And I think the floaters went on vacation, or that lump of clay is a mighty big floater, LOL. But, I'm fine tha k you Roberta.
    Jan 16 2017 09:40 AM
Photo

Mark (Marko) Madrazo

I had some Laguna ^5 Porcelain sitting around in a 5gal bucket for a year or so. Sooo, I cleaned my wheel of stoneware (spotless) and my tools, so I made some candle holders with in the Mishima technique. Do you think it would be better to fire with a clear glaze of without? I want the colors in the design to be bright.
Jan 10 2017 04:07 PM
  • glazenerd's Photo
    glazenerd
    Yes you can. You will see some color shifts, pending the amount of iron in your stoneware clay. Colors will be brighter, different hues perhaps.
    Jan 11 2017 07:38 AM
  • Roberta12's Photo
    Roberta12
    again, I concur with the venerable Nerd. I go back and forth from porcelain to a white stoneware.

    Jan 11 2017 08:52 AM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Thank you, good people.
    Jan 11 2017 09:55 PM
Photo

Mark (Marko) Madrazo

And, Yea! I finally will fix my small Paragon with new bricks and elements. So happy.
Jan 07 2017 09:44 PM
  • glazenerd's Photo
    glazenerd
    Here a little, there a little.
    Jan 07 2017 10:25 PM
Photo

Mark (Marko) Madrazo

Anyone miss me? I got locked out when I changed my email.
Dec 28 2016 08:25 PM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Actually no, Joel, it was me. I switched my email and had not made the verification, after I saved my new email. Somehow, it made me outcast. But being somewhat tech savvy, I did fix it. So never going to forget this experience.
    Dec 29 2016 08:49 PM
  • ChenowethArts's Photo
    ChenowethArts
    Very glad that you recovered from the switch in emails...and welcome back!
    Dec 31 2016 06:15 PM
  • Mark (Marko) Madrazo's Photo
    Mark (Marko) Madrazo
    Thanks Paul. It was scary. I felt so alone, it was cold. And dark. But I'm better. lol. Always good to be here.
    Dec 31 2016 10:52 PM