Jump to content


golemstudio

Member Since 02 Aug 2013
Offline Last Active Aug 03 2013 09:19 AM
-----

Posts I've Made

In Topic: Clay And Glaze Temperatures

03 August 2013 - 09:23 AM

Thanks everyone for your help.

Show us pictures once you give it a try, I'm eager to see how this adventure will result.


In Topic: Clay And Glaze Temperatures

03 August 2013 - 09:22 AM

hello, your website shows some very nice things.  excellent work, bright colors.  the only thing missing is the measurement of each piece.  cannot tell if i am looking at something the size of a fingernail or a hand.  hope you do well.

Do you mean our website, golemstudio.com ? If yes, most of the pendants and cabs are between 36 and 45 mm in the longest dimension, the beads are much smaller. I'll be happy to answer any questions.


In Topic: Clay And Glaze Temperatures

02 August 2013 - 04:40 PM

Yes, applying the glaze on the fully matured clay body after the cone 5 firing will be a bit tricky, but still doable. For easier application you can heat the fired pieces before the glazing. Placing the items that will be glazed on the top of running kiln works just fine, other option is to heat them in kitchen oven. Using a bit thicker glaze than normally will be helpful too.