Jump to content


DAY

Member Since 19 Jan 2011
Offline Last Active Sep 28 2013 08:45 AM
-----

Posts I've Made

In Topic: Getting A Kiln Delivered

16 September 2013 - 12:35 PM

Since you are 'getting back into clay' i assume there is no rush. If so, check craigs list daily. my last two L&L 23 inch kilns (one with a computer control) went for $500 and $700. Make sure there are photos, and with L&L the serial number is the date of manufacture.


In Topic: Electric Kiln

24 August 2013 - 09:00 AM

Jennifer, see if you can download the instruction manual.

I know with my L&L kilns there are dozens of pages telling how to do everything from write a custom program for crystal firing to doing 15 minutes at 500 degrees for a pizza. I have yet to try a crystal firing. :D


In Topic: Deciding Between Electric Kilns

16 August 2013 - 08:03 AM

Slightly off topic:

If you/anyone really intends to do a lot of cone ten firing, why not go with gas? That temperature is really hard on elements, and you can't do reduction or salt.


In Topic: Electric Kiln

09 August 2013 - 08:51 AM

Is there anything made in your hemisphere? China? South Africa? South America?


In Topic: Electric Kiln Design: 'bucket' Or 'box' Preference?

03 August 2013 - 12:21 PM

I currently load a pair of 7.5 cu ft 'bucket' kilns about six times a week. (same height as the 10 cu ft) I don't have any health issues doing the job. I am 5'8", 30 pounds overweight, and 72 years old.