Jump to content


Mo Collier

Member Since 01 May 2013
Offline Last Active Mar 24 2014 12:10 PM
-----

Posts I've Made

In Topic: Help Please

01 May 2013 - 11:16 PM


If the cone bent, you're good to go, unless something odd happened that knocked the cone out, but that's very very unlikely. I wouldn't fret. My L&L e18T-3 (18 x 27 inches) kiln can get to 04 in just over 4 hours.


I only use my kiln setter to fire. You'll be ok.


Thanks for the feedback, its very much appreciated. :0)

In Topic: Help Please

01 May 2013 - 11:15 PM

If the cone bent, you're good to go, unless something odd happened that knocked the cone out, but that's very very unlikely. I wouldn't fret. My L&L e18T-3 (18 x 27 inches) kiln can get to 04 in just over 4 hours.


Thanks! very happy to hear that and appreciate the info....
Mo

In Topic: Help Please

01 May 2013 - 03:05 PM

So it didn't reach temp? Took longer? What exactly happened? Did the cone shut it off? 4.5 hours is quite possible, especially in a small kiln.


The ^ in the sitter bent enough for it to shut down, I don't have a digital read for temp so I'm merely hoping that it indeed did reach temp. I know that's probably not the best approach and I am still waiting for Blue diamond to get back to be about a thermometer for that kiln. Thanks for the feed back it is very much appreciated.