Jump to content


Member Since 29 Nov 2012
Offline Last Active Yesterday, 09:52 PM

#55205 Falls Creek Shino

Posted by deborah. on 22 March 2014 - 07:11 PM

Beautiful examples. Thanks for the pictures and informative post!

Pic # 2. Is that a dark slip decoration ( horizontal lines), applied while leather hard, bisqued then fcs glazed? What is dark slip formula formula? I have a slip that is clay body slip (helios) with black mason and a clay body slip with manganese I will experiment with......

#3 I'm assuming there is a lot of texture in piece.? Secondly it appears to play well with other glazes?

#1. I love 266. But all the health warning posts make me afraid to buy more of it. :(


#2: Exactly. I'm pretty sure it's 266 in slip form but I may be forgetting the exact clay


#3 It loves texture! It breaks on anything (lettering, throwing lines) but it sometimes has to be more of a severe texture like the mug to get it to break with two glazes, depending on the combination (test!). And yes, it plays well with almost all of our glazes except for the really funky ones that don't like to play well with others.


#1 I only use 266 on rare occasions. I don't worry much about it wet but am super cautious doing anything that might create dust with it.

#55203 Falls Creek Shino

Posted by deborah. on 22 March 2014 - 06:33 PM

I know the falls creek shino really, really well. It's one of the favorite glazes my studio works with, and I've used it myself hundreds of times. It's the clay body that (mainly) causes the color change. It's always creamy/oatmeally on white clays. On anything darker, it's great. The first picture is using a really dark clay (Standard's 266), the second is using a porcelain with a dark slip decoration, and the last is Standard's Hazelnut clay (312, I think) with a green glaze over the top. All the pieces have the same thickness of glaze. On the darker clays, a thicker application can lighten up the glaze, but it always is creamy on the white clays no matter how thin of a coat you apply.


Hope this helped some,


Attached Files

#33862 Do you feel that it is important to have a sketch book to capture ideas? | 04...

Posted by deborah. on 30 April 2013 - 09:09 AM

I carry a single sketchbook with me everywhere. The front starts with anything that's not related to glazing, and the back starts with glazing. When they meet, it's time to get a new one!