pclllc Posted May 7, 2015 Report Share Posted May 7, 2015 Hello new member here, just happened to stop at a local ceramic shop yesterday and the lady was giving away both kilns with kiln sitters. The heating element pieces about 4 to 5 inches had broken off and she wanted newer smaller kilns for her business. So I had my pickup and picked them up and them home. After looking at the element wires there is a break in one wire on both and the bottom steel needs to be replaced along with the element wire on the large kiln and both tube assemblies. Is it worth the time and effort, I also cannot not find any pdf manuals free or otherwise for either unit. Any help would be greatly appreciated. At this point I am only out a little back strain, lol. Link to comment Share on other sites More sharing options...
neilestrick Posted May 7, 2015 Report Share Posted May 7, 2015 Sno disappeared many years ago. Call the good folks at Euclids. If they don't already have the specs for those kilns, they may still be able to make elements for them if you can get them the info they need. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.