tjparker1957 Posted April 18, 2015 Report Share Posted April 18, 2015 Have old Pasco p-6 kiln , bought used and elements are shot . looked all over internet can't find anyplace that has them. it is 240 volts and 28 amps. I measured the slot and the back of the element is 1/2" beyond the face of the brick and the slot measures 1/4" vertically. there are 16 brick making up the circumfrance of the kiln and the back of the element sits 1/2 back from the face of the brick which measures 3 1/2" making where the back side of the element sits which makes each brick hold a section 3 3/4"long of the element. so 16 x 3 3/4 = 60". so the business part of the element should measure approx, 60" plus the ends being x" where it goes for the hookup. so i think what I need would be 6 elements 1/4" diameter x 60" plus x". any body able send me a link where i could purchase them Link to comment Share on other sites More sharing options...
bciskepottery Posted April 18, 2015 Report Share Posted April 18, 2015 http://www.euclids.com/index.php?cat_name=kiln-elements These folks may be able to help. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted April 19, 2015 Report Share Posted April 19, 2015 Yep. I was going to recommend Euclid's too. Good place. Marcia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.