Plattypus Posted April 17, 2015 Report Share Posted April 17, 2015 I am a high school ceramics teacher. We purchase all popular brand glazes both low and cone 6. I inherited several bottles of glaze that are as old as 2007. Do glazes go bad? Can having a glaze be too thick causing it to crack and fall off the bisque ware? Please advise... Link to comment Share on other sites More sharing options...
rayaldridge Posted April 18, 2015 Report Share Posted April 18, 2015 I have some buckets of glaze that are at least 25 years old. If the glaze is too thick, you could add small amounts of water until it seems a better consistency. If you have an enthusiastic student, have him or her make test tiles and just test each old glaze to see if it's something you'd want to work with. Could make a nice project for someone. Link to comment Share on other sites More sharing options...
TJR Posted April 18, 2015 Report Share Posted April 18, 2015 Just check the labels and make sure they are not lead based. It will say on the label. Don't use those.Put some water in the jars of good ones, soak over night, and mix with a fettling knife. If you are brushing them on, no need to sieve. TJR. Link to comment Share on other sites More sharing options...
Chilly Posted April 18, 2015 Report Share Posted April 18, 2015 I too inherited old glazes. I had problems with two of them, flaking off before firing. I contacted the supplier and then sent me something (binder) to add to the glaze. It worked. There are two previous threads all about flaking glazes and what to do with them. http://community.cer...off/?hl=flaking http://community.cer...king#entry68822 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.