ZackP Posted October 30, 2014 Report Share Posted October 30, 2014 Hello everyone, someone I know is looking to purchase a kiln (they have just purchased and received their wheel) and are hoping to receive advice on a kiln. They are looking at 6 or 7 cubic feet kilns and are unsure which way to go and are just hoping to get some words of advice. Thank you! Here are the kilns they are selecting from: https://www.baileypottery.com/kilns/...Leleckilns.htm Link to comment Share on other sites More sharing options...
neilestrick Posted October 30, 2014 Report Share Posted October 30, 2014 It all depends on if they need the height or not. Always get the kiln you'll need in 5+ years, not the kiln you need today. Link to comment Share on other sites More sharing options...
clay lover Posted October 30, 2014 Report Share Posted October 30, 2014 When I got my 7 cubic ft. Skutt, it was huge, it immediately started shrinking, and several years later, it is TINY. BUT, it has also gotten deeper, if you get my drift. Go Mas! Link to comment Share on other sites More sharing options...
Foxden Posted October 31, 2014 Report Share Posted October 31, 2014 I have always had the 7 cu ft model, wanting the ability to make tall pieces. Actually only needed the height a few times. Always wondered if a shorter wider kiln would be more user friendly and accomadate ware more easily. I don't foresee throwing or building too many things over 18" tall, and if I do I have other options available. I think assessing your work honestly, size-wise, really helps you decide. Link to comment Share on other sites More sharing options...
neilestrick Posted October 31, 2014 Report Share Posted October 31, 2014 23x27 inch kilns are the most popular size, but lately I've been selling a lot of 28x18 inch kilns instead. Same cubic footage, but easier to load, and the wider diameter allows for more efficient use of the space. Most people never make pieces over 18" tall. My 'big' lidded jars are generally 16" max, and it's really hard to sell things of that size in this economy. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted October 31, 2014 Report Share Posted October 31, 2014 As Neil first said it depends on the persons needs. It looks like the 28x18 is popular because of its versatility. What does your friend make re. size. That is the key. marcia Link to comment Share on other sites More sharing options...
clay lover Posted October 31, 2014 Report Share Posted October 31, 2014 My 2nd kiln will be the 18" tall. Older I get , shorter I am! Link to comment Share on other sites More sharing options...
timbo_heff Posted October 31, 2014 Report Share Posted October 31, 2014 New 23x22 is a perfect size: easy to load but still a decent capacity and can handle 20" pots which is pretty good for most mere mortals 5.83 cu ft http://www.sheffield-pottery.com/CONEART-BX2322D-ROUND-CERAMICS-KILN-p/scabx2322d.htm Link to comment Share on other sites More sharing options...
Foxden Posted October 31, 2014 Report Share Posted October 31, 2014 I wish more manufacturers made there shorter kilns this height. Most are 18 inches, less at least an inch if you use a shelf above the floor. Link to comment Share on other sites More sharing options...
mrthumbs Posted November 1, 2014 Report Share Posted November 1, 2014 Agree with Neil. Buy the kiln you'll need in a few years. After all, spending a couple of bucks now will give you more versatility later. I have a Skutt 1231 and find it surprisingly short when I need to fire lots of pots. On the other hand, I need to be careful loading the first level as I don't want to fall in! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.