Jump to content
Sign in to follow this  
Tree

Clay Body For Lg Sculptures

Recommended Posts

Tree    1

My base clay is a cone 5/6 stoneware body. The last firing is Raku. With that in mind, when building a clay body for large sculptures that may have walls as thick as 1 and 1/2 inch, what percentage is considered a good percentage of filler? Why or why not?

Thanks

Share this post


Link to post
Share on other sites
Linnet    2

How large are your pieces? What type of filler are you speaking of? SAND? or are you looking for somthing that will burn out when fired?

Share this post


Link to post
Share on other sites
Tree    1

How large are your pieces? What type of filler are you speaking of? SAND? or are you looking for somthing that will burn out when fired?

 

Share this post


Link to post
Share on other sites
Tree    1

The filler I am speaking of is grog and Kyanite. Kyanite is useful in Raku. Most of my work is Raku. It helps with some of the thermal shock issues and helps reduce cracks in the clay. I do not throw on the wheel. My pieces are hand built. I begin with a solid mass and form my basic shape. At some point I have to hollow out the piece. In some areas of the sculpt, the walls are easily an inch thick. This is what helps support the overall shape. Even pieces that are only 24 inches tall need that thicker wall towards the bottom to provide the support. Compared to some large sculpts I have seen my work is probably not considered large. My largest sculpts have had areas that were 1and 1/2 inch thick possibly thicker. I fire very slow.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×