Babs Posted March 14, 2017 Author Report Share Posted March 14, 2017 wondering now whatthe soda ash soln. sprayed on top of glaze would do?/ Link to comment Share on other sites More sharing options...
Guest JBaymore Posted March 14, 2017 Report Share Posted March 14, 2017 wondering now whatthe soda ash soln. sprayed on top of glaze would do?/ Try it. best, ................john Link to comment Share on other sites More sharing options...
glazenerd Posted March 14, 2017 Report Share Posted March 14, 2017 Do not apply it to the whole piece: glaze it and then do test spots with increasing amounts of ash. Then you have one piece you can judge effects on, in lieu of a side by side. Draw quadrant lines on the foot: and number 1-4 so you can track which quarter has what %. Nerd Link to comment Share on other sites More sharing options...
Magnolia Mud Research Posted March 14, 2017 Report Share Posted March 14, 2017 I spray nearly saturated soda ash (SA)water over glazes at cone 10. Be careful that you don't wash the glaze off when spraying. (I use a spray bottle with either a wide pattern, or a straight stream). Never had a problem. Sometimes the result was not as appealing as I expected. I don't often use a 'runny' glaze, so have no data on SA over a 'runny' glaze. like John said, just try it and see what happens. LT Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted March 14, 2017 Report Share Posted March 14, 2017 I am going to be running test on these plates I am making seems like a good place to test the solution, I will post findings although at this point I don't expect a lot from it going over glazes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.