PSC Posted May 2, 2014 Report Share Posted May 2, 2014 Hi. The studio where i teach has received a donation of a Lehman glaze mixer Model GS20c found on this link its the last item on the page: http://www.lehmanmfg.com/slipomatic.html Is there any way to convert it to mixing clay or smaller batches of glaze? We just do not mix 25 gallons of glaze at a time. It has a 1/2 horsepower motor. Link to comment Share on other sites More sharing options...
dave the potter Posted May 2, 2014 Report Share Posted May 2, 2014 This can reclaim scrap clay into slip with no modifications. You just don't want to put large blocks of clay in it. I have seen several suggestions about drying slip in other posts. Personally I use plaster slabs. Link to comment Share on other sites More sharing options...
Stephen Posted May 2, 2014 Report Share Posted May 2, 2014 I would be happy to convert it for you. Just send it to me and I will send you back my drill mixer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.