Chilly Posted April 16, 2014 Report Share Posted April 16, 2014 I now have a camera (tablet) that can do "time-lapse", so next time I fire my little kiln I'm going to set it up. Any suggestions as to how often I should take a reading? I'm more interested in how fast it cools than heats. I'm thinking of 10 minute intervals. That would give me about 60 readings over the time it usually takes to cool. As I can only programme xdegs per hour, is that too often? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.