Jump to content

Recomendations For Wheel Table Shape And Size.


Recommended Posts

I am building a second wheel and have reached that part of the plan where I need to decide the size and shape of the table or work  area under the wheel head.  I see some video where there is very little if anything under the wheel head, as well as video where there seems to be almost a 50 gallon barrel underneath.  If you were to create a wheel from scratch, what would you like and what would you avoid.

Link to comment
Share on other sites

I have some rolling tables and one is by my wheel. I can switch them. I also throw next to my plaster wedging table , and throw wet slop from the bucket rim onto the plaster and anything I trim off the top or bottom when I am throwing. Fast recycling that way. I have an extended board on the wheel /splash pan for water and tools and lumps of clay. Bats are hanging from longs hooks on pegboard above the wedging table or on a lower shelf on the rolling table.

 

Marcia

Link to comment
Share on other sites

The wheel I rebuilt (rotten top Pacifica) now has a 2 foot by three foot maple top rectangular, 1.5 inches thick. I purchased the top added more sealer and put the old parts under it, it has no splash pan but I don't use one. I also stand so there is enough space for a shelf under there, have not gotten to that. If I was to do it over, I would make my table a little bigger. I would also buy the highest quality bearings, as I bought the cheapest ones and there are getting noisy after about 10,000 lab of clay, the original ones lasted about 40,000 before getting noisy, maybe see if there is a difference in the seals on the bearings. Also I would put it on wheels that can be put down, like on heavy shop tools, as my wheel is now very heavy for moving(not that I move it much). Hope that helps, your needs may be different so good luck with your project.

Jeremy

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.