Marge Posted November 29, 2013 Report Share Posted November 29, 2013 I'm interested in purchasing a grinder for the bottom of my pots. Do I get a side grinder, or is there something out there that lies flat that I can just hold my pot over? I'd like to make the bottom very smooth so they don't scratch a glass table. Thanks for any advice... Happy Thanksgiving! Link to comment Share on other sites More sharing options...
Babs Posted November 29, 2013 Report Share Posted November 29, 2013 There is a whole heap of replies to a similar post MArge, I'll try and locate it for you. Its "Grinding the Bottom of your pots' By Rebbylicious. So search that topic. Its in this forum. Link to comment Share on other sites More sharing options...
Mark C. Posted November 29, 2013 Report Share Posted November 29, 2013 http://community.ceramicartsdaily.org/topic/4790-grinding-the-bottom-of-your-pots/?hl=grinder Mark Link to comment Share on other sites More sharing options...
WillowTreePottery Posted November 29, 2013 Report Share Posted November 29, 2013 http://kilnshelf.com/glazeeraser This is one of the best investments I ever made. Link to comment Share on other sites More sharing options...
neilestrick Posted November 29, 2013 Report Share Posted November 29, 2013 I just use 220 grit wet-dry sandpaper. Only takes a second to get them super smooth. It also helps if you burnish the foot a little with your knuckle after you trim. Link to comment Share on other sites More sharing options...
Biglou13 Posted November 30, 2013 Report Share Posted November 30, 2013 The diamond pads rock. If production potter go with mechanized diamond pads. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.