Jump to content

Recommended Posts

I bought a used Creative Industries, Clay Boss electric wheel. The foot pedal is now malfunctioning. It seems like I need to replace this specific piece. Not sure where I should order this or what it is called. I have not gotten any responses from Speedball. 

Link to comment
Share on other sites

Have you taken it apart and looked at it? I had a malfunctioning foot pedal and took the thing apart and it's pretty simple inside. My issue was moisture and I used a hair dryer and it started working again.  inside mine was just a few wires. I can't imagine it's too hard to fix but agin for me it was just moisture. 

Link to comment
Share on other sites

Sorry my picture won't upload! I really appreciate the responses.

 

I'll try to describe the piece.....its a white plastic piece about 6 inches long. Triangular shaped with 'teeth' on one end. The teeth seem to be worn down.

Sometimes when I press down on the foot pedal is works, but most of the time the wheel just simply doesn't spin. 

 

If this part cannot be replaced, should I get a new foot pedal? where can this be ordered?

 

I'm a newbie!

Link to comment
Share on other sites

good luck, my experience with speedball has been nothing short of dismal.  Where are you located?

 

pretty disappointed with the service! I live in sonoma county. I live close to Creative Ceramics and Glass, they told me I should just order the part myself so I don't have to pay them to do it. The owner also did not know what the name of the part is!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.