Jump to content

Making A Kiln Lid


Recommended Posts

I was wondering if anyone has any suggestions on the type of cement to use to make a new kiln lid. Have been searching but haven't found anything that's made for lids, most cements I have found say not to use on lids. I am in the process of making a new gas kiln and would like to cement this one instead of drilling and cinching with all thread as I did on the last kiln. I have some amaco kiln cement, would this work? Will be firing mostly to cone 5-6 with an occasional cone 10.

Link to comment
Share on other sites

I think that any kiln lid you construct will have to have some form of compression support at the circumference. Over the years I do not recall ever seeing in books or studios a lid without some form of external support-angle iron and threaded bars etc. I would check the library on kiln construction if you haven't already.

Link to comment
Share on other sites

Is this a typical front loading gas kiln? If so, just build an arch. It's just as quick and infinitely stronger. I wouldn't trust mortar to hold together the top of a kiln that is any more than 28 inches across. Give us some more info about the kiln. Size, shape, wall thickness, materials, etc.

Arches are elegant and very strong. We use that design on larger kilns. Should you decide to make a flat top, here is a video that shows how to cement the bricks together. As you will see, making a lid is an art form. The people who cement lids for a living are as skilled as brick layers. Note that the bricks are not sprayed with water, because the cement is applied very rapidly to the bricks. The long pan is essential.

 

 

 

Sincerely,

 

Arnold Howard

Paragon Industries, L.P., Mesquite, Texas USA

ahoward@paragonweb.com / www.paragonweb.com

Link to comment
Share on other sites

Thanks for the replies. The kiln is going to be top loading square kiln, 36" square outside with 4.5" wall thickness giving it 27" square inside. Using 9x3x4.5" 2600 IFB with a hard brick around the gas ports to prevent damaging soft bricks. It will have 2 intake ports and a downdraft exhaust. Will be using propane as a fuel source. And yes I reckon I do mean mortar instead of cement. Was also considering making it a two piece lid for weight purposes. Ill be lifting on and off most likely unless I decide to fabricate a hinge system.

Link to comment
Share on other sites

Not sure where you live but the right cement can be had from Hi-Temp in Portland Or, it comes in 5 gallon buckets and can be shipped-they make it themselves on site-I have used the super 33 for gluing bricks but they have another made for skutt kilns that would be a better choice.Call them and talk to them-they are not a potters supply  business but will sell you a tub.Ask for Jeff

Mark

Link to comment
Share on other sites

  • 8 months later...

I need to build a new kiln lid, flat type with sheet metal round the outside bolted into tension. This is more a reminder to myself to watch the video as I can't seem to watch it at work.

 

Just one question, kiln cement/mortar doesn't need firing for it to work? Anybody in the UK know of a good make/type?

Link to comment
Share on other sites

  • 1 year later...

Does the lid have to be brick? My homemade gas kiln is top loading. The lid is a frame of stainless steel with a couple of bits of angle aluminium across the top from which homemade ceramic buttons on shanks of kanthal element wire, suspend 5 inches of ceramic fibre. I get into the kiln by lifting each side onto a hook and swing it out of the way.

Link to comment
Share on other sites

Fiber blanket is best used in applications where it is not moved. Each time fiber blanket is moved or touched it releases fibers into the air which can be inhaled. Inhaling fiber is not good for your lungs. Yes, it is light weight and insulates well, but it is by no means durable and is the least safe kiln building material to work with.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.