Phil J Posted September 10, 2013 Report Share Posted September 10, 2013 Has anyone tried using a meat grinder as a pugmill? We don't use enough clay at one time to justify even the smallest comercial model. I thinking of comercial hand grinders which are available used for about $50 around here. Link to comment Share on other sites More sharing options...
oldlady Posted September 10, 2013 Report Share Posted September 10, 2013 i tried this many years ago. the metal gave way and broke. maybe you have a stronger one. Link to comment Share on other sites More sharing options...
Mark C. Posted September 10, 2013 Report Share Posted September 10, 2013 Stoneware burgers-could be a new thing-fired slow with smoke and wood chips in your electric I can see them lining up for more. I do not think this will work but who knows? Mark Link to comment Share on other sites More sharing options...
jrgpots Posted September 10, 2013 Report Share Posted September 10, 2013 If you try it, take out the cutter just behind the extruder plate. I would also soften the clay as much as possible to avoid the previously mentioned blow out. Good luck. If it works, please report back. Jed Link to comment Share on other sites More sharing options...
Nancy S. Posted September 10, 2013 Report Share Posted September 10, 2013 I've wondered about this myself...completely cast-iron ones can be found in the antique shops around here. I kick myself for not taking my grandmother's when I had the chance, but I wasn't into grinding beef, charcuterie, or pottery back then, and declined.... Link to comment Share on other sites More sharing options...
TJR Posted September 11, 2013 Report Share Posted September 11, 2013 You don't need a pug mill. Just wedge, bag it up let it age and then spiral wedge. This is just one more thing to break. I say give it a pass. TJR. Link to comment Share on other sites More sharing options...
Pam S Posted September 11, 2013 Report Share Posted September 11, 2013 My partner in mud thinks we need a pug mill. I can't agree as we don't recycle enough clay in a year to warrent the cost (IMHO). Now that you've brought this up, I'm thinking potato ricer! Hmm, trip to the kitchen gadet store! Link to comment Share on other sites More sharing options...
Mart Posted September 11, 2013 Report Share Posted September 11, 2013 You probably do not need pug mill. I have 2 heavy duty buckets in my studio. 10 L each. Bought form local construction/hardware store for few €. Probably made for carrying cement and garbage etc. All the clay with grog goes to one and no grog stuff goes to other one. When they are almost full, add water so it's covered, let it sit for a day or two, pull the stuff out, wedge, lay it out on a plaster slab to try and then wedge and then it goes back to a strong plastic bag (I reuse the bags it was sold in). As simple as that. I do that maybe once a month or even less. I never leave clay laying around and if I can, all the extra pieces go straight back to the bag where it originated, so I do not have to throw them in to a bucket. Most of the content in those buckets is from throwing wheel. Link to comment Share on other sites More sharing options...
Bugs Posted September 11, 2013 Report Share Posted September 11, 2013 Some of us have been recycling clay in canvas bags. We have found it to be far better than plaster. The clay is just placed in the bag and the bag hung up to dry. When it begins to get somewhat firm it can be kneaded a bit. If you are willing to watch it more closely it can be put out on a concrete driveway in the bag and will dry out much quicker. It can be turned every couple of hours. When it is "done" the bag can be turned inside out and the clay comes out in a nice lump. I usually take it out before it is quite as dry as it needs to be and put it in a plastic bag. Link to comment Share on other sites More sharing options...
Stephen Posted September 12, 2013 Report Share Posted September 12, 2013 The other advantage to a de-airing pug mill is that it often makes it emotionally easier to toss a form that's not working and grab another ball since the recycle process is so much less hassle. Link to comment Share on other sites More sharing options...
Pres Posted September 12, 2013 Report Share Posted September 12, 2013 You probably do not need pug mill. I have 2 heavy duty buckets in my studio. 10 L each. Bought form local construction/hardware store for few €. Probably made for carrying cement and garbage etc. All the clay with grog goes to one and no grog stuff goes to other one. When they are almost full, add water so it's covered, let it sit for a day or two, pull the stuff out, wedge, lay it out on a plaster slab to try and then wedge and then it goes back to a strong plastic bag (I reuse the bags it was sold in). As simple as that. I do that maybe once a month or even less. I never leave clay laying around and if I can, all the extra pieces go straight back to the bag where it originated, so I do not have to throw them in to a bucket. Most of the content in those buckets is from throwing wheel. In the winter, let it freeze in a plastic basin with drain in bottom, Bring it into heated area and let thaw-water drains off leaving pretty decent wedgeable clay. Link to comment Share on other sites More sharing options...
Biglou13 Posted September 12, 2013 Report Share Posted September 12, 2013 You don't need a pug mill. Just wedge, bag it up let it age and then spiral wedge. This is just one more thing to break. I say give it a pass. TJR. Love it rocking it old school......... It's what I do. Making second batch this weekend Link to comment Share on other sites More sharing options...
Pnutbrand Posted September 18, 2013 Report Share Posted September 18, 2013 I tried using a small hand crank meat grinder. It ended up being more of a pain then what it was worth. Ended up going with the smallest Peter pugger I could get at the time, they may have a smaller model now but idk. It handles about 25 pounds in a batch and does a wonderful job. The results and time/labor savings will out way the costs and your wrists and elbows will be appreciative, at least mine were. Link to comment Share on other sites More sharing options...
Phil J Posted September 18, 2013 Author Report Share Posted September 18, 2013 Thank you for your replies. We have a large meat grinder on order from Gander Mountain. I can't afford the cost of a comercial pug mill or the physical stress of doing it by hand. Link to comment Share on other sites More sharing options...
Mark C. Posted September 19, 2013 Report Share Posted September 19, 2013 Did you get a power model or manual model? Please let us know how this works out for you- Mark Link to comment Share on other sites More sharing options...
Phil J Posted September 19, 2013 Author Report Share Posted September 19, 2013 it's a hand crank and on B/O right now. I'll post how it works. Link to comment Share on other sites More sharing options...
ronfire Posted July 14, 2015 Report Share Posted July 14, 2015 I was thinking of the same thing. See this post has bean sitting awhile maybe a bump up will help to see if anyone else has tried this. Link to comment Share on other sites More sharing options...
Mark C. Posted July 14, 2015 Report Share Posted July 14, 2015 We never got anyfeed back on how a meat grinder works with clay? let us know how it works for you? Mark Link to comment Share on other sites More sharing options...
oldlady Posted July 14, 2015 Report Share Posted July 14, 2015 it broke. immediately. Link to comment Share on other sites More sharing options...
Mark C. Posted July 15, 2015 Report Share Posted July 15, 2015 it broke. immediately. I guess my plan to use a kitchen blender as a clay mixer is out now? mark Link to comment Share on other sites More sharing options...
earthfan Posted July 15, 2015 Report Share Posted July 15, 2015 I have access to two Venco de-airing pug machines. Our pottery club has one for white clay and one for dark. But to take my clay with me when I am on duty, and use the pug machines, is more trouble than it is worth. Two years ago, I pugged several bags of clay that I had wetted down and it wasn't any fun at all. I had to put the clay through twice to get the rid of the two colour spiral that remained in the clay after only one pass. I have not used the machine since. I have gotten very efficient at cut and bash wedging and call it 'exercise'. Link to comment Share on other sites More sharing options...
Denice Posted July 15, 2015 Report Share Posted July 15, 2015 I have the same exercise routine except I call it the slam! Denice Link to comment Share on other sites More sharing options...
earthfan Posted July 16, 2015 Report Share Posted July 16, 2015 The cut and slam wedging method has the advantage of exposing any grotty bits that have somehow got into the clay. My own hair, for instance. Pug machines or kneading, spiral or otherwise, don't help you locate and remove unwanted small bits. Link to comment Share on other sites More sharing options...
jrgpots Posted July 16, 2015 Report Share Posted July 16, 2015 I get my slop and trimming buckets really wet, make a slurry, and stir with electric drill paddle. the thick slurry goes in canvas bags which are hung and drip dried. I store the clay in 5 gallon buckets with a wet rag on top and lids on. I dig local clay and use the same process. I tried the meat grinder. The housing for the auger cracked. It was one of many disasters I choose not to admit to owning... There a microbiology term that descibes the amount of disasters....TMTC...(too many to count)... Jed Link to comment Share on other sites More sharing options...
earthfan Posted July 18, 2015 Report Share Posted July 18, 2015 I don't have any canvas bags, but the legs of old jeans work just fine as long as they don't have holes in them. A friend has a jeans leg attached with some kind of clamp to the outlet of her wheel splash pan . The sewn up hem end sits in a bucket. All the throwing slip and turnings go into the jeans leg. When the jeans leg is full, she ties up the open end and lets it stiffen. The cut and slam method of wedging doesn't require very much strength. You don't have to lift the whole lump of clay, only half at a time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.