dooarts Posted September 6, 2013 Report Share Posted September 6, 2013 Can I use the glaze that I brush on (and pour) for spraying? Do I just need to thin it, or do I need a completely different glaze? Thanks Link to comment Share on other sites More sharing options...
Min Posted September 6, 2013 Report Share Posted September 6, 2013 You can spray a dipping, pouring or brushing glaze. If it is a commercial brushing glaze it probably has gums and flocculants added to it to make it thick. If this is the case then you can either water it down just enough so it sprays or you can use a deflocculant (sodium silicate or Darvan). Increasing the psi of the compressor also helps spray a thick glaze, I spray one of my glazes on when it is a yogurt consistency this way. Link to comment Share on other sites More sharing options...
shayes Posted October 25, 2013 Report Share Posted October 25, 2013 I usually water down my glaze that I spray to a cream consistency and over compensate by spraying a few layers. Also make sure your glaze is mixed and screened really well so it does not clog up the spray gun. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.